704 shift pattern decal

[Vinylguy 4,666]

Does anyone have a better image and dimensions for this decal.

Trying to get it accurate and need to have it done this week.

A scan of an old one would be great. and then all i need would be the h x w dimensions of the decal to get the proportions correct.

Thanks

Wizard

[Michael Bullington 5]

okay heres my best shot

Width - 6"

Height - 5 1/8"

The top black section measured from the top of decal to the top of the silver section is 2 1/8"

Space between the choke and throttle 4" Center of hole --1" on each side

Distance from the outside edge of the (3) to the outside edge of the (2) is 1 1/2"

The silver center section (choke etc) measured from top of silver to the bottom of the silver is 7/16"

The lower stripped section measures 2 /916" from the bottom of the silver section to the bottom of the decal ...(There should be 16 sections with 15 lines between)

The Key hole measured to center of hole 2 15/16 from the top of decal and 2 3/16 from the bottom of the decal

[Coadster32 793]

Who could ask for anything more?? :omg:

[HorseFixer 2,012]

I need one too! Terry how goes the progress? :omg:

[Don1977 604]

Who could ask for anything more??

The width at the bottom, unless that caused by the camera angle.