Confused99 2 #1 Posted May 12, 2009 I am in need of the model number for the deck on my D200. I believe it is a 48" side discharge. I am in need of the belt number. Thanks, Jason Share this post Link to post Share on other sites
Sparky-(Admin) 19,435 #2 Posted May 12, 2009 Your tractor is model# 81-20KS01 and a 48"SD deck would be model#85-48XS01. Go here https://lookup3.toro.com/partdex/index.cfm and enter the deck # and you can get a part# for either belt you'll need (PTO belt or blade belt). Mike....... Share this post Link to post Share on other sites
Confused99 2 #3 Posted May 12, 2009 Thank you Sparky. Share this post Link to post Share on other sites
linen beige 14 #4 Posted May 12, 2009 Using Sparky's deck model # the belt chart shows part #1594 for the spindle belt (Cross section HA, 107.21 inches long), and part #102868 for the mower drive belt (Cross section HA, 105.50 inches long). Share this post Link to post Share on other sites
Confused99 2 #5 Posted May 12, 2009 Yes, I am needing the 102868 mower drive belt. It is MIA on the new D200. Share this post Link to post Share on other sites
linen beige 14 #6 Posted May 12, 2009 Yes, I am needing the 102868 mower drive belt. It is MIA on the new D200. You can order it from Toro's web site for $34.89 plus shipping. Parts tree lists it for $29.47 plus shipping. Sohar's has it for $30.13 plus shipping. They also show an aftermarket for $25.37 plus shipping, but it is 1/2 inch shorter than original. Your local dealer may have it for less? Share this post Link to post Share on other sites