Kelly 1,028 #1 Posted April 18, 2009 will the tines from a late 60's tiller work on the newer tillers? not the old ones with the engine on them. Share this post Link to post Share on other sites
Jim_M 178 #2 Posted April 18, 2009 Yup, they're the same animal even though the part number changes a few times over the years. Share this post Link to post Share on other sites
jtmoyer 1 #3 Posted April 19, 2009 so any idea how the tines come off? i have an old tiller and i can't get to budge. Share this post Link to post Share on other sites
kpinnc 10,433 #4 Posted April 19, 2009 so any idea how the tines come off? i have an old tiller and i can't get to budge. They can be a bear. I had to use a blue flame wrench and a puller together, which ended up bending the cross shaft. Luckily, my local machine shop made me a new one. If you don't HAVE to remove them (I had axle seals that were completely gone), I wouldn't risk damaging something that's very expensive to replace. Kevin Share this post Link to post Share on other sites
jtmoyer 1 #5 Posted April 19, 2009 i tried getting them off with a sledge, no dice. i to think i will have to heat things up a bit to get them off just wanted to see if i was missing something. Share this post Link to post Share on other sites