IN NEED OF 20hp Horizontal 1 1/8 Shaft

[stumpkicker 0]

Well my second Engine whent KaaaaPlewie !

Cranks/Pistons/Blocks Bad !

Needing a 20hp Horizontal shaft 1 1/8in for replacement!

If anyone wants to part with a used one (PLEASE)

Jimmy G Holland, Ohio Across from the Toledo Airport!

Thanks Guys ahead of time.

See Ya JimmyG

Saving the old parts on case I can't find another engine ! No matter what I do it is about $1000.00 for another from what I am seeing.

[04fxdwgi 0]

Jimmy,

Sorry I don't have one for ya, but how bad is yours? If it is at all rebuildable, there are resources to make her new again, though a little pricey. If you aren't into rebuilding, I may be interested in aquiring it, if you want to part with it. I'm looking for a complete P220-G core to rebuild for a "spare".

You know how it goes, if you have a spare, the origional will last forever.

Bill C.

[Don1977 604]

Northern Tool + Equipment has new ones the shalt is 1 1/8 X 2 13/16

I don't know what shaft length you need but I believe you could make it work.

They have a 17 HP and 25 HP Kohler K-Series, $2069 and $3299.

[jerrell 1]

Hey stumpkicker, check out the "small engine warehouse," got a 20 honda electric start for 860.00, but they have a ton of engines, i was lucky enough to pick up a used 20 hp Onan for 400.00 had to travel 600 miles to get it but it was worth it, the PO had to start it up before accepting the $, pretty rare...