520h rubber hood hold downs and seat shock

[Schrec050584 2]

Can anyone tell me the size or share a link or part number where i can find hood hold downs and a seat shock. Also what size bolts are used for the shock. I have spacers already.

[953 nut 51,539]

Check this out for the hood hold downs.

https://www.actusinc.com/pdf/Latch_Product_Brochure.pdf

[chev0545 231]

call a to z tractor.used but cheap.i get my strut's from amazon.

[Tankman 3,515]

Just ordered four 3” hold downs.

They look to be exactly like NOS,

Inexpensive, shipping was more.

Thanks, 953 Nut! 

[Schrec050584 2]

2 hours ago, Tankman said:

Just ordered four 3” hold downs.

They look to be exactly like NOS,

Inexpensive, shipping was more.

Thanks, 953 Nut! 

Where from?

[953 nut 51,539]

6 minutes ago, Schrec050584 said:

Where from?

 

On 8/31/2018 at 5:43 PM, 953 nut said:

Check this out for the hood hold downs.

https://www.actusinc.com/pdf/Latch_Product_Brochure.pdf

 

[Tankman 3,515]

1 minute ago, Schrec050584 said:

Where from?

The 953nut’s link above. 

Ordered the 3 inchers and a couple of pins.

My Work Horse has rivets holding the rubber top end in place. Easy enough to flat bottom drill off.

Very cheap and appear, “exact match”.

[Blue Delta 35]

Recommend going aftermarket on the seat strut as Chev mentioned, ones from Toro must be made from gold for what they charge.

[Tankman 3,515]

I hate the parts lists, i.e.: TORO part number. Why not read, i.e.: bolt, hex 3/8-16 x 2"? TOO EASY!!!!   

[ericj 1,576]

problem is the bolts aren't 2", they are 1 7/8" or something dumb like that.

 

 

 

 

 

 

 

eric j

[Blue Delta 35]

3 hours ago, Tankman said:

I hate the parts lists, i.e.: TORO part number. Why not read, i.e.: bolt, hex 3/8-16 x 2"? TOO EASY!!!!   

You mean 321-8 (Screw-HH), 3256-22 (Washer-Flat), 3296-42 (Nut-Lock, NI) x2 & 114343 (Gas-Spring) HA

 

You could use anything that fits through the spacer as that is the *more* important part.