Pullstart 59,665 #1 Posted July 28, 2018 Hanging out in the pits tonight, my father in law qualified first in his class. Fun times! 5 8 1 Share this post Link to post Share on other sites
WVHillbilly520H 10,369 #2 Posted July 28, 2018 Sweet... 1 Share this post Link to post Share on other sites
Pullstart 59,665 #3 Posted July 28, 2018 Brother in law is rubbing too... #37 3 2 Share this post Link to post Share on other sites
ebinmaine 63,089 #4 Posted July 29, 2018 I know next to nothing about most auto racing classes but I've always liked those open wheeled cars. The old school hot rod look is just plain sweet. What's the drivetrain in those rigs? Share this post Link to post Share on other sites
Pullstart 59,665 #5 Posted July 29, 2018 Most are running straight 6 engines, there are a few allowed to run v8’s but they are limited to crate engines, I believe. The 6’s are pushing about 550 horsepower, so the v8 has no real advantage st the rpm’s they are spinning. We ended up overheating during a caution, but we were about .08 seconds from track record with about half throttle. Battling carb setup issues, but when you’re allowed only 10 minuet practices, it’s hard to tune a carb under full load in just one night. My my brother in law in the Super Late Models won a feature towards the end of the night. It’s a blast to be so close to the action! 1 Share this post Link to post Share on other sites
ebinmaine 63,089 #6 Posted July 29, 2018 Love the old straight 6 engines. Had a 292 in an 81 Chevy. Heavy 3/4 ton chassis with 9 leaf one ton tear springs. Turbo 400. 4:56 rear. Offenhauser aluminum intake with a 450 cfm Holley model 4380 mechanical secondary carb. Found a bigger exhaust manifold ( from what I can't remember). Chevelle mid sixties front pipe. Turbo muffler. Changed the ignition timing a bit. Went down the road well. 4 Share this post Link to post Share on other sites
Pullstart 59,665 #7 Posted August 11, 2018 Round 2, heading out to wheel it again. The ignition timing was too far advanced, running way hot. We got that dialed in, made some cooling modifications, now it’s time to run her hard! 1 3 Share this post Link to post Share on other sites
953 nut 51,632 #8 Posted August 11, 2018 Go fast; turn left; go for the gusto! 2 Share this post Link to post Share on other sites
Pullstart 59,665 #9 Posted August 11, 2018 @AMC RULES there’s something for everyone here! 3 Share this post Link to post Share on other sites
Pullstart 59,665 #10 Posted August 11, 2018 Took our first feature win! 2 1 1 Share this post Link to post Share on other sites
953 nut 51,632 #11 Posted August 12, 2018 1 hour ago, pullstart said: Took our first feature win! Share this post Link to post Share on other sites
Pullstart 59,665 #12 Posted August 15, 2018 So, looking back... it was the heat we won, we were getting ready for the feature. Sorry ‘bout that, I guess I was excited that the car made the show! We lead the entire feature by about half a lap, and in the last corner of the last lap, they threw the yellow, we overheated and blew the head gasket again. The car didn’t have the power to finish the race under power, but he coasted over the finish line and we didn’t end up in any victory lane again. It was Hall of Fame night, so they had Bob Senneker come out with his Camaro and a ‘32 Ford. 2 2 Share this post Link to post Share on other sites
Pullstart 59,665 #13 Posted August 15, 2018 (edited) You can hear the car not running right towards the end, it was shutting off and firing back up coming out of the corners, I think the head gasket blew on 3 or 4 cylinders at some point! Edited August 15, 2018 by pullstart 1 1 Share this post Link to post Share on other sites
The Tuul Crib 7,332 #14 Posted August 17, 2018 Ah yes, good ole oval track we have a dirt oval near me I can hear. I use to go with the folks every week end growing up. Wasn't long after that I stared drag racing the quarter and eighth mile! Great memories! 1 Share this post Link to post Share on other sites
RandyLittrell 3,827 #15 Posted August 19, 2018 On 7/29/2018 at 3:41 PM, ebinmaine said: Love the old straight 6 engines. Had a 292 in an 81 Chevy. Heavy 3/4 ton chassis with 9 leaf one ton tear springs. Turbo 400. 4:56 rear. Offenhauser aluminum intake with a 450 cfm Holley model 4380 mechanical secondary carb. Found a bigger exhaust manifold ( from what I can't remember). Chevelle mid sixties front pipe. Turbo muffler. Changed the ignition timing a bit. Went down the road well. I believe those 292's had a 4 3/4" stroke! Whole lotta torque! Randy 1 1 Share this post Link to post Share on other sites
oneroadkingman 53 #16 Posted August 24, 2018 Yes I used to watch Bob senneker he was a wheel man's back in the day. that's for sure along withthe likes of Dick Trickle, Don Biederman ,Junior Hanley to mechin a few. 1 Share this post Link to post Share on other sites
Pullstart 59,665 #17 Posted April 25, 2019 Well, a new season, new track, new cars. My inlaw’s are hitting the dirt with IMCA Dirt Mods. We’re heading to practice now. 2 1 Share this post Link to post Share on other sites
953 nut 51,632 #18 Posted April 25, 2019 Will you be using a like the big boys did? 1 1 1 1 Share this post Link to post Share on other sites
ebinmaine 63,089 #19 Posted April 25, 2019 44 minutes ago, 953 nut said: Will you be using a like the big boys did? That's an AWESOME pic Richard 1 Share this post Link to post Share on other sites
953 nut 51,632 #20 Posted April 26, 2019 2 hours ago, ebinmaine said: AWESOME pic One of many from this thread. 1 1 Share this post Link to post Share on other sites
