Jump to content
bumpsteer

C101 safety switches

Recommended Posts

bumpsteer

So I replaced my brake lining and clutch spring (there were two small ones hooked together). Now I have developed a no start condition. I beleve it to be in the clutch safety switch or what wheel horse calls the pedal interlock switch. When it first started this I was sitting on tractor and had pedal pushed down and it would not start lifted off pedal and pushed a few more times and it cranked. Had this happen several times. Now it will not work. It starts fine by jumping solenoid. Where is the dadblasted switch located crawled under tractor and cant find it. I figured it would be someplace on the linkage. Help please.

Doug 

 

  

Share this post


Link to post
Share on other sites
 
Racinbob

Yours is on the right side of the transmission. It is actuated by the idler arm. :)

Share this post


Link to post
Share on other sites
 
bumpsteer

Thanks, I found it. Had to remove the shifter plate to get to it but its fixed now.

Share this post


Link to post
Share on other sites
 
tunahead72

Just curious... What did you do to fix the problem?

Share this post


Link to post
Share on other sites
 
bumpsteer

I removed it and sprayed it with WD to break the crud up then sprayed it down with contact cleaner use 600 grit on the spades and reinstalled.

  • Like 1

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...