cleat 4,936 #26 Posted August 27, 2018 Rear wheels are now mounted. All that is left is the rear fender painting and taillights, then install a new seat lift support and this machine is done. Cleat 1 1 Share this post Link to post Share on other sites
cleat 4,936 #27 Posted September 16, 2018 Well, I got the fender stripped of paint as it had many layers of flaking terrible paint. I used chemical stripping for this. Then it got wire wheeled and sanded/ Then the bottom got a couple of coats of high temp black (I like that paint for durability). Then the topside got a coat pf primer that was sanded then a coat of IH red. I will sand that and apply a second coat whenever this darn humidity clears and the paint will dry properly. Cleat 2 3 Share this post Link to post Share on other sites
cleat 4,936 #28 Posted September 16, 2018 The paint felt dry enough so I sanded it and applied a top coat. It is much smoother ans shinier now. Fender is just sitting on a 416, not the 520. I have new tail lights from TSC to install once paint is dry. Also decal from Terry will finish it off. Cleat 1 3 Share this post Link to post Share on other sites
Daron1965 644 #29 Posted September 16, 2018 Looks great. 1 Share this post Link to post Share on other sites
cleat 4,936 #30 Posted September 19, 2018 Tail lights from TSC installed with LED bulbs. Fender installed onto tractor. Terry's rear decal is here, just need to let paint dry some more then install that to be complete. Cleat 1 3 Share this post Link to post Share on other sites
peter lena 8,031 #31 Posted September 19, 2018 cleat , fantastic job ! I can only imagine how fired up you must have been to recover these two horses. your thoroughness and insight detail really shows, also having a well set up shop let you get after issues without having to fumble around. the pictures were the doing all the talking for you, thank you for taking us along for the ride, terrific work , pete 2 Share this post Link to post Share on other sites
Rob R 951 #32 Posted September 20, 2018 Super work Cleat doing yourself proud with those two ponies...... Share this post Link to post Share on other sites
WHX?? 46,637 #33 Posted September 20, 2018 You sure do nice work Cleat ...thanks for sharing. Share this post Link to post Share on other sites
Lane Ranger 10,472 #34 Posted September 20, 2018 Cleat: what is the product number on those TSC. Lights? I do not recall seeing those in our local store! They look great on your tractor! Share this post Link to post Share on other sites
cleat 4,936 #35 Posted September 20, 2018 This is the light. https://www.tscstores.com/RED-WITH-REFLECTOR-CLEARANCE-LIGHT-P137.aspx It is made by perterson. Better yet, they were 25% off last weekend just when I wanted to buy them. This is at TSC Canada, yours might be different. Cleat 1 Share this post Link to post Share on other sites
Lane Ranger 10,472 #36 Posted September 20, 2018 Yes I have been to tsc in Canada ( about seven years ago when I picked up a 1964. Wheel Horse 1054 in Milton. Near Toronto). They are more like co-ops inCanada. But stuff in store was similar and spread out like here. I needed a tarp to put over tractor and attachments! I recalli paid $600 for it even then. Share this post Link to post Share on other sites
Redline69 27 #37 Posted September 22, 2018 Fantastic job on both those. The 520 is outstanding! Share this post Link to post Share on other sites
cleat 4,936 #38 Posted September 29, 2018 Decal installed on rear fender (great job Terry). Just need to install Matt's foot control and the console decals. Cleat 1 1 Share this post Link to post Share on other sites
AMC RULES 36,940 #39 Posted September 29, 2018 Does look great. Share this post Link to post Share on other sites
cleat 4,936 #40 Posted October 6, 2018 Tractor finally finished with Matt's foot Control and remainder of Terry's decals installed. This 520 is now a joy to drive and to look at. Thanks to Matt and Terry for their excellent products. Cleat 1 1 Share this post Link to post Share on other sites
Redline69 27 #41 Posted October 6, 2018 Beautiful job Cleat! What's the story on the Matt's Foot control you put on? Thanks. Share this post Link to post Share on other sites
cleat 4,936 #42 Posted October 6, 2018 Matt is a vendor on this site that sells this kit. I have this on all 5 of my 520's as it works so well. Cleat 1 Share this post Link to post Share on other sites
ericj 1,576 #43 Posted October 7, 2018 looks real good cleat eric j Share this post Link to post Share on other sites
Redline69 27 #44 Posted October 7, 2018 16 hours ago, cleat said: Matt is a vendor on this site that sells this kit. I have this on all 5 of my 520's as it works so well. Cleat Thanks for that info. It looks like an easy to install, and easy to use assembly! Share this post Link to post Share on other sites
