Jump to content
"Manic-Mechanic"

18 Auto Clutch Assembly-Bearings 102914/102919

Recommended Posts

"Manic-Mechanic"

Hello,

      I rebuilt my PTO & Clutch Assembly last Season, following the manual I used "Anti-Seize" instead of "Molly", however, the bearings actually locked up! I may have inadvertently used too much "Never Seize"! Well, I did free up 102914 (14-22) but, not 102919 (14-29)! It is trashed beyond repair! I understood Anti-Seize to have "Powdered Aluminum" which does not bond to steel thus providing a barrier between parts. Even after the grease or oil is cooked out under severe heat the part is still free. These bearings were actually locked up inside and wholly spinning in place! Having to rebuild again and tracking down the illusive bearings, I do not want to make another very costly mistake! Lol!

Any help greatly appreciated,

 

Oldman

 

PTO.gif

Edited by Oldman

Share this post


Link to post
Share on other sites
 
R. L. Addison

Thought I had The bearing,but wrong number. The number I have is 102914, qty (2). All I have otherwise  is the clutch complete. Sorry, thought I could help, but apparently I was wrong, as usual.

  • Excellent 1

Share this post


Link to post
Share on other sites
 
"Manic-Mechanic"

:think:102914 is one of the numbers

 

Oldman

Edited by Oldman

Share this post


Link to post
Share on other sites
 
R. L. Addison

Fafnir 9110PP  or 911OPP.

  • Excellent 1

Share this post


Link to post
Share on other sites
 
"Manic-Mechanic"

This one? Fafnir 9110pp Radial Deep Groove Ball Bearing 50 X 80 X 16

 

Oldman

Share this post


Link to post
Share on other sites
 
pfrederi

BALL BEARING 50X80X16MM 2 SEALS 0.6 LB   Found it but sit down $56

  • Excellent 1

Share this post


Link to post
Share on other sites
 
"Manic-Mechanic"

That's the 102914 and 56 is a great price!

 

Oldman

Share this post


Link to post
Share on other sites
 
pfrederi
26 minutes ago, Oldman said:

That's the 102914 and 56 is a great price!

 

Oldman

 

I think i have a different definition of "Great Price" Cheap old SOB that I am  :P

  • Haha 1

Share this post


Link to post
Share on other sites
 
"Manic-Mechanic"

well, toro has that one for 153.39! I found one for 11.00-new so far! Quality? 1.950 x 3.140 x 6.30/1.870 x 2.950 x 6.30

 

Oldman

Share this post


Link to post
Share on other sites
 
pfrederi

$56 was Timken

Found these much cheaper

bearing.JPG

  • Excellent 1

Share this post


Link to post
Share on other sites
 
"Manic-Mechanic"

Excellent, looks like 102914 is readily available! A japan made 6010 sealed, is 43.30 Applied Technologies in Chbg, PA. The other one, 102919 is the odd ball. 1.870 x 2.950 x .630inch or 47.498 x 74.93 x 16.02mm. Giving +0/- .010  should round it down or up? Lol!

 

Oldman

Edited by Oldman

Share this post


Link to post
Share on other sites
 
pfrederi
25 minutes ago, Oldman said:

Excellent, looks like 102914 is readily available! A japan made 6010 sealed, is 43.30 Applied Technologies in Chbg, PA. The other one, 102919 is the odd ball. 1.870 x 2.950 x .630inch or 47.498 x 74.93 x 16.02mm. Giving +0/- .010  should round it down or up? Lol!

 

Oldman

Couldn't find any bearing with 75mm outer other than 45mm or 50mm shaft.

  I think I would take the old bearing to a bearing place....

 

 

http://www.skf.com/us/system/ProductSearchResult.html

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...