DANIEL/ALEASHA 2 #1 Posted February 10, 2018 Just joined this don't know anything about it really I've got a 68 Raider 10 Wheel Horse and the cloth looking material inside my brake band fell out and I'm wondering where to get new parts for this Share this post Link to post Share on other sites
dells68 7,494 #2 Posted February 10, 2018 Check out Bob Maynard's listing in the Vendor's section. He has them - very nice guy! And by the way ! Best place on the web for our little red tractors!! 5 Share this post Link to post Share on other sites
BOB ELLISON 2,976 #4 Posted February 11, 2018 Welcome time Redsqure Here's where to go. 2 1 Share this post Link to post Share on other sites
R. L. Addison 299 #5 Posted February 11, 2018 I epoxied one back in, haven't proved it out yet. Share this post Link to post Share on other sites
953 nut 51,464 #6 Posted February 11, 2018 We have quite few vendors here that make our lives so much easier. http://www.wheelhorseforum.com/forum/92-vendors/ 1 Share this post Link to post Share on other sites
JoeM 7,602 #8 Posted February 11, 2018 9 hours ago, R. L. Addison said: I epoxied one back in, haven't proved it out yet. I used JB Weld on one too. I took the band off, cleaned up the surfaces, applied the epoxy with the new material. Reinstalled applying the tractor brake to clamp it in place over night. Still working fine. Share this post Link to post Share on other sites
Tankman 3,515 #9 Posted February 11, 2018 (edited) Without the forum Horse nuts we'd all be at a loss. The WHA (Wheel Horse Addiction) diseased sick obsessed infected blessed forum members love their Stallions. Their Horses love them back too! Love the Raiders. Edited February 11, 2018 by Tankman 2 Share this post Link to post Share on other sites
Tankman 3,515 #10 Posted February 11, 2018 (edited) Just ask Rod or Roy! Edited February 11, 2018 by Tankman Share this post Link to post Share on other sites
The Gman 476 #11 Posted February 11, 2018 Welcome to the square... Share this post Link to post Share on other sites
KC9KAS 4,741 #12 Posted February 11, 2018 @DANIEL/ALEASHA . Share this post Link to post Share on other sites
JimmyJam 516 #13 Posted February 11, 2018 TO As suggested Bob Maynard @rmaynard is the "Go To" man! Share this post Link to post Share on other sites
JERSEYHAWG / Glenn 4,487 #14 Posted February 11, 2018 Hey Dan, . Glenn Share this post Link to post Share on other sites
