Lee1977 6,173 #151 Posted April 7, 2023 On 3/16/2018 at 8:27 AM, Pullstart said: I cut the hood repair panel out of a box store yard cart/trailer tailgate that was dropped off for my scrap pile, then trimmed it to fit between the frame rails and rest on the edges of the angle iron. There are two pictures of the steering wheel while the 502 was still assembled. Notice the slop between the two pictures, and the tires had not moved! Almost as bad as them old Chevys you should right at home with that. Share this post Link to post Share on other sites
Pullstart 58,793 #152 Posted April 8, 2023 2 hours ago, Lee1977 said: Almost as bad as them old Chevys you should right at home with that. I’m flattered you are going back to read through this, 5 years later Share this post Link to post Share on other sites
Pullstart 58,793 #153 Posted February 27 I figured it was time to fire up Putt Putt since the last time I tried I ripped the pull handle off. Share this post Link to post Share on other sites