Dial 1 #1 Posted January 21, 2018 Hi folks, I have a 1979 C161 Auto and have been given a 42" Dozer blade (the blade with the springs and pivot) for which I would like to fabricate an A frame. Have seen some pictures and manuals so I know what I am looking to make but can anyone give me the important dimensions e.g. rear pivots to blade pivot; rear pivots to angle(turn-in) point; lift hitch position etc. Would be most grateful as could save a lot of trail and error. Pic of the blade attached (sorry about quality) Mant thank, Dial Share this post Link to post Share on other sites
WVHillbilly520H 10,369 #2 Posted January 21, 2018 (edited) Maybe this will help get the "ball" rolling, the measurements are with the 520 extension kit take 4" off the OAL, Jeff. Edited January 21, 2018 by WVHillbilly520H Share this post Link to post Share on other sites
Dial 1 #5 Posted January 21, 2018 2 hours ago, WVHillbilly520H said: Maybe this will help get the "ball" rolling, the measurements are with the 520 extension kit take 4" off the OAL, Jeff. Many thanks Jeff, that does indeed get things underway. David 1 Share this post Link to post Share on other sites
