Wheel Horse Deck ID

[Searcher60 208]

I have an old 42” side discharge deck with the keyway spindle shafts, and the one piece rounded belt cover. ID tag is long gone. Anybody know how to ID this deck, or at least the spindle assembly part numbers? Thanks in advance,

[953 nut 51,510]

This isn't the exact same deck (it is for a vertical shaft 200 series) but spindles are probably the same.

 

Check out this one too.

 

[gwest_ca-(File Mod) 10,478]

Don't know much about decks but it appears that one-piece cover was first used on the 5-1010 deck.

 

Here is a list of the decks in the order they were produced

5-1001 replaces RL-426, 5-1421, 5-1422, 5-1423, 5-1000

5-1001 replaced by 5-1010, 5-1011, 5-1012, 65-42MS01, 65-42MS02, 75-42MS01 (Blades up to this point had a 5/8" x 3/4" double-D center hole)

(The following decks used blades with a 3/4" center hole) 75-42MS02, 85-42MS01, 95-42MS00, 95-42MS01, 05-42MS01, 05-42MS02, 05-42MS03, 05-42MS04, 05-42MS05, 15-42SC01, 15-42SC02, 15-42SC03/78345

& 85551 front hitch

 

Click on the fuzzy picture below and download the file from there. When the page opens you can see screen shots of the spindle assemblies. Click on one to enlarge.

Garry

 

Adding

The one-piece cover 6770 was replaced by 106081 and shows as being used up to and including 1979 but complete coverage is not always complete in the on-line info.

[Searcher60 208]

9 hours ago, 953 nut said:

This isn't the exact same deck (it is for a vertical shaft 200 series) but spindles are probably the same.

 

Check out this one too.

It’s appears to be the O5-42MS02. Thanks a bunch!