Jump to content
12Horse Paladin

brake pedal fix, help/info wanted, please

Recommended Posts

12Horse Paladin

Hello all, was wondering if anyone could help me out with info or advice on how to go about fixing my brake pedal on my '92 312-8. I don't know if it's just a pin/part that needs replacing, or there is more to it than that...I have hand tools, but am not really mechanically inclined---learning this stuff as I go. Pics/instructions to follow, would be appreciated.

 

My machine is parked/put up for the winter, 'bout 120miles from here; going about lots of this backwards, I know, but I'm trying to build my store of knowledge, for now, Thanks for any and all help.

 

Here is a pic for reference. Dad told me it is a common problem; we just didn't get to it lasttime I was back home, where it is stored currently (after going over fluids, cleaning, etc). I just like things to be "right"...he laughed when I found a replacement NOS hr meter for the pictured empty hole (now since installed),,,to him THAT was an uneeded "bell" (as in, ...whistle).

 

If the mods need to move this post, no problem; I looked around, didn't see a "specific" place that fit better to post my question.

 

IMG_1515.JPG.0043a58bf2278014386850cef1cf2c68.JPG

 

Edited by 12Horse Paladin

Share this post


Link to post
Share on other sites
 
BOB ELLISON

Probably the rod came out or a spring broke.

Here's the manuals to help.

 

 

 

  • Like 3

Share this post


Link to post
Share on other sites
 
953 nut

:WRS:             The illustration on page 15 of this manual gives a bit more information on the brakes for your Wheel Horse. Simple hand tools will be sufficient for this job.

 

  • Like 3

Share this post


Link to post
Share on other sites
 
Jerry77

This might help:  https://www.ereplacementparts.com/toro-3116oe01-1988-lawn-tractor-parts-c-121776_128672_131927.html    Don't be alarmed at the year - they are all more or less the same ....in your series....:twocents-02cents:

Edited by Jerry77
clarification
  • Like 1

Share this post


Link to post
Share on other sites
 
gwest_ca

The foot running board acts as a stop to keep the pedal coming back like that if I remember correctly.

Lift the pedal up and see if the corner of the running board is bent down. Bend back up and it should restore the stop function.

 

Garry

  • Like 2

Share this post


Link to post
Share on other sites
 
12Horse Paladin

Thanks all, for the info. Gives me a place to reference, and start.

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • tallen4392
      By tallen4392
      looking for rear weights  12 inch  close to 01077 zip maybe fits also let me know what you have  Thanks
    • Duramax7man7
      By Duramax7man7
      Very Solid tractor!

      Newer Agro Tires on Rear and Solid Front Turf Tires. Wheel Weights on rear. Fully Swapped Forward Swept axle off of 520h. I ran my 60" Deck on this tractor for over a year with no issues. 
      Deck it solid top to bottom with no rot and newer blades. Belt and Pulley are good to go! 
      She's just a little dusty and needs a cleaning. Can get a nice Seat a Tractor Supply. 
       
      $1175 OBO   -POOS

      (248) 9for3-8six3four Text or Call. I do not visit this site enough. God Bless. 

      NEW SEAT INSTALLED ON THIS TRACTOR! Started it up and ran it for a while yesterday... Forgot how nice this thing is. Tempting to keep it but it's time to send her one her way. GREAT TRACTOR! 


       


    • Wvtroutbum81
      By Wvtroutbum81
      Got my dads 1992 312-8 when he passed
      have a snow plow and 42” deck.
      gathering parts to restore back to new as possible. This is my therapy.
    • Tj_WH_Collector
      By Tj_WH_Collector
      Hello y'all,
       
      I hope everyone is staying safe and staying healthy. If not, i pray that you or whoever is afflicted be healed soon. 
       
      I hope to learn a lot from the forums and hopefully can use some of you young whipper snappers for your brains (ideas, how to's and such). Lol. Btw i am only 30, much respect for the older generation(s)!
       
      For me, well... If i would have found this 5-6 years ago, i would have said I am new to Wheel Horse. That is about the time my dad bought the 312-8 (that i now own). That purchase and talking to my dad about implements/attachments that i could purchase is what got me so interested in wheel horse. 
       
      Like i mentioned, i started with a 312-8. When i purchased from my dad, it came with a mower pan and a snowblower (wrong model tho). Wisconsin winters were brutal and a regular snowblower was taking me 2+ hours to clear the driveway. Thats when i bought my B-100, included in that deal was a mower pan and a plow. Boy... that B-100 has plowed a lot of snow. I love it. 
       
      I had also bought 2 lack luster tillers at some auctions. Well, that made me look for a tiller attachment. Found one relatively close and went to go look. $200 later, i had a tiller loaded into my truck and i had asked if he had the tillers mount for the rear axle. He said he wasnt sure, but he has a wheel horse sitting in the back. Told me to go look. 
       
      I look over this 854, and there is no rear mount. Just as im getting up, he asks if i want the tractor. I said i only got the $200 i gave you. He said free of charge. And thats how i gained my 854. (854s hood is in my shop)
       
      I want to start restoring my wheel horses, pretty paint, new decals, clean them up. I am proud of what i own. 
       
      And now im looking at getting a D200 with FEL and a backhoe. Its a sketch time to buy but i could use the tractor for house and cabin work. 
       
      Pics are attached. Please ignore the messes. They aint the prettiest tractors, but they all run. 
       
       



    • Burnerman
      By Burnerman
      Been a long time since I posted. Hope everyone is doing well. 
      I work doing HVAC In a medical center and have been working quite a bit. 
      Anyway my son and I made a run to the local salvage yard today to cleanup all the scrap steel that’s been laying around. My wife was happy to see us finally getting some money for our junk instead of paying to get rid of it. Well..... it cost us $20 but we got another horse. 
      let’s see how this goes. 
      312-8 with SD deck. 
×
×
  • Create New...