W/H JUNKY 43 #1 Posted October 30, 2017 Hi again everyone. Iam working on a D160 with a Onan. On the top of the carburetor where the air cleaner cover attaches there are four holes 3 are for the screws for the cover then what is the 4th one for. My problem is gas is coming out of it and starts to flood the engine out. Please help. I have pictures but dont know how to get them attached here on RS. Thank you in advance. Share this post Link to post Share on other sites
boomers_influence 106 #2 Posted October 30, 2017 W/H the fourth hole is the carb vent. you most likely have a bad float ( composite ) and or a bad needle and seat. this should be a marvel shebler carb. ( # on the back of the carb, or on a tag on the front 11 up to 16 ) boomers_influence@yahoo.com 651 437 2826 M-F 10-7 S-S 12-6 cent time. thank you. boomer ( the used onan engine parts guy, also NOS and new ) Share this post Link to post Share on other sites
W/H JUNKY 43 #3 Posted October 30, 2017 Boomer do you sell a rebuilt kit for these carbs Share this post Link to post Share on other sites
boomers_influence 106 #4 Posted October 31, 2017 W/H yes, i do stock the kits for the marvel shebler, and nikki carbs. thank you. boomer Share this post Link to post Share on other sites
Jack695 0 #5 Posted November 10, 2017 Boomer, I am fixing up a D-160 I just got. Its a 1976 with an Onan 16hp and looks like it should have had the DD11/12/13 carb on it (whichever had the attached fuel pump). But a previous owner, for reasons unknown to me, replaced it with a carb I have never seen before and added an electric fuel pump. Well, that worked for a bit, I guess, but its not working now. I want to go back to whatever was original on this. I have the body of a DD carb (I think its a DD11) and no fuel pump. I also see the vacuum line has been cut short and a screw put in it. Questions: What carb set up came with this particular year and model? Do you sell those things I would need to rebuild this and get it back to operation? Do you sell any hats with the WH logo? (sorry, off topic, but I had to ask) Share this post Link to post Share on other sites
boomers_influence 106 #6 Posted November 11, 2017 jack my contact information is listed in the second post of this thread. no hats. thank you. boomer Share this post Link to post Share on other sites