Recently Browsing 0 members
No registered users viewing this page.
Looking for an engine for a 1976 A-100. It's a Briggs # 251707 0161-01 76061512 (I was able to pull parts on Briggs up by using # 251707 0161-99).
And or a running parts tractor. Complete tractor (and or motor alone) must be in good running condition with no charging or fuel related issues.
I'm a cash buyer, no BS.
I have a 79 C-111 that I pulled a running 11hp briggs and stratton engine from and also a front push blade. I am looking to sale both. Push blade 200 Engine 100
I also have the original mowing deck for this mower. I am looking for a WH pull behind tiller attachment, maybe trade?
By Rob R
Hi folks Brewster Rob here, was gifted a Cub Cadet LTX 1040 in great shape other then a completely blown 19HP in-famous Kohler Courage SV590, today I acquired a 17HP Pro OHV CV490S in perfect running condition.... so I want to swap the engines. They have identical vertical shafts question is the electrical. The Courage had four wires coming from the engine red/green/white/purple, the Pro has 3 white, 1blk and 1 red. I also have the alternator and regulator from the blown Courage.... might I be able to swap alternators??? I of course have the old Courage key switch I do NOT have the new engine key switch......... Need help from the Red Square wizards and PLEASE think about the best result way to go here.... thank you in advance.
By MAD MARK
Bought this 310-8 for $100 came with a plow but no engine. Just want to put in the cheap HF $99 Predator 6.5hp. Searched on here and found that people have done this but I cant really find any information on what they needed to do to get it to work. Looks like about a 2" engine plate since the height of the PTOs are different and the mounting bolt locations are different. Besides that, any more tips or pointers?
Just making this into a cheap plow tractor, I saw the linkage below the 310-8 is not like below my 312-8. It does not have a chain lift and just a straight bar. I mounted the blade to my 312-8 and it worked fine. Guessing the bar is so I can push down on the blade if need be? Is this something included in the plow package I missed before? Any insight there?