Recently Browsing 0 members
No registered users viewing this page.
By Elijah’s Wheel Horse 417A
Hello all, I recently inherited a Wheel Horse 417-A from my Late Grand-Father. It has been leaking from the Oil Pressure Sensor and I can’t seem to find this particular sensor anywhere If you could give me some leads that would be great! The engine is a KT17 Series II it smokes right under the muffler coming from the sensor i would like to fix it as it has the mowing deck, 2 Tillers, snow plow/dozer, snow blower, and 2 cabs this tractor is very centimental to me and it runs amazing other than this little part!! Also if you could provide any information on this particular model that would be great! Thanks!
I refurbished my 1985 Side Discharge Deck model j05-42MS04. And my son started mowing with it this summer on the 312-8. I've read many threads about these WH decks mowing low but were Texas newbies when it comes to mowing with them
So mowing low is a known issue but has anyone come up with a solution?
Since these decks are free floating has anyone tried installing larger rear deck wheels?? I'm thinking larger front roller would not help since if. I understand correctly these should not always be touching.
Im looking for ideas ?
I need a picture of the finished deck but you can see from these pics I completely disassembled the deck, replaced all bearing and sliders etc. Took it to bare metal. Did some straightening And repainted it.
I'm selling a 1973 Wheel Horse 16 Automatic. It has a cast iron Kohler and is not running. I think it has a broken connecting rod. It ran strong- and loud!- right up to the end. I had just finished rebuilding the 42" mower deck when the engine quit. I didn't even get the lawn mowed once after the deck rebuild. It's been stored ever since. I have a 42" blade and 42" snowthrower that go with the tractor. I hate to sell it but I just don't have the room to store it since I inherited a newer tractor. I have all the manuals and receipts going back 40 years in a big three ring binder- my dad kept every piece of paperwork! I'm asking $500.00 OBO for the tractor and all attachments. I've advertised on Craigslist and haven't had a nibble. Mainly I don't want to see it scrapped- I want it to go to a good home with a collector who'll appreciate it for what it is, a piece of history in a heavy hunk of old iron. There must be somebody out there who'd like this tractor!
Hi everyone I have a 312-8 wheel horse over here in the UK. and I have just repaired the mower deck I beleve it is Model: A5-42MS02, as it had become rether ventilated. hole were there should not be holes.
On putting back to gether I can ont find if there is a proper way to align the blades.
has anyone got an idea how they align or does it not matter? can i just bolt them back on any old how?
heres a photo of my wheel horse.
I have a Wheel Horse Model 416-8 with 16 HP Kohler engine for sale with roughly 1000 hours on the meter. Along with the tractor I have a leaf rake which needs work as well as a plow, wheel weights, and chains. Within the last month I have put on two new front tires, new blades, and replaced the fuel pump. The seat is pretty beat up, but is the original. I have the original purchase receipt from the original owner as well as all manuals. The only issue is the mower deck recently started leaning on the front edge. I'm sure it's an easy fix, I just am ready for a new tractor. One of the roller wheels in the front is also cracked in half. The deck is 42", I can provide pictures if you are interested. Located in Newtown, CT