Jump to content
Xearl

bagger weight

By Xearl, in Implements and Attachments

Recommended Posts

Xearl    131

Xearl
Posted

what is toro 98-3096 part used for on a bagger . I saw it on ebay .  ED

Share this post

Link to post
Share on other sites
 

gwest_ca-(File Mod)    10,478

gwest_ca
Posted

Here is a parts page that shows the #7 weight

http://www.partstree.com/parts/toro/accessories/79310-toro-48-vacuum-bagger-for-5xi-garden-tractors-sn-8900001-8999999-1998/belt-cover-and-weight-assembly/

 

Here are some of the applications - these lists are often not complete

http://www.partstree.com/parts/toro/parts/98-3096/

 

Garry

Share this post

Link to post
Share on other sites
 

Xearl    131

Xearl
Posted

Thanks Garry , I guess this offsets the weight of the blower . I have a spring on the blower side to help take some of the weight . I have never seen one oh these before .  Ed

Share this post

Link to post
Share on other sites
 

gsleezer    35

gsleezer
Posted

How much does this weight weigh?

Share this post

Link to post
Share on other sites
 

Xearl    131

Xearl
Posted

I really don't know  .  I have a spring on mine to compensate for the blower .

Share this post

Link to post
Share on other sites
 

Lee1977    6,209

Lee1977
Posted
On 4/7/2021 at 3:10 PM, Xearl said:

I really don't know  .  I have a spring on mine to compensate for the blower .

Toro add a third bar on the lift assembly that will level the deck on for power baggers  I does on the left side and welded to the back cross bar.  I made one for my deck I used the vacuum with.

SAM-0743.jpg

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • Xearl
      Plow trouble
      By Xearl
      While plowing today the spring popped off . I screwed it back on twice and the last time I had to go searching for it . I'm thinking of welding or brazing ,any thoughts ?  I think the ends are cast or steel .
    • Xearl
      523DXI snow blower question
      By Xearl
      44" Snow blower .  I want to straighten this guard but I don't know if the belt is supposed wind up in front or back of it . In the second picture the guard or guide is just on the other side of the pulley .


    • Xearl
      523XI Snow blower trouble
      By Xearl
      Well we got the snow  and halfway down the driveway the augers stopped turning . Well once before the belt came off , not this time .  I can turn the auger but the impeller shaft doesn't move . Looking at the parts diagram there are keyways on both gears and I'm hoping one of them sheared off .  Has anyone worked on one of these  ? I could use some advice on the best way to go about this .  I just spent two days with the 518 XI with a plow clearing enough to get out and have enough room for delivery trucks to turn around .
    • Xearl
      2 stage snowblower
      By Xearl
      I have a 523dxi with a 2 stage snowblower and I popped the belt off the engine pulley. I don't know how to release enough tension together it back on without taking it apart. Can someone please help me. 
    • Xearl
      Weight bracket
      By Xearl
      I bought this John Deere weight bracket from   doc724  and mounted some weights from and old exercise machine . It's 120lbs. This is on my 523DXI .

×
×
  • Create New...