416-8 finally here are pic's

[drewd 55]

Finally I have a few pics from the 416-8 I picked up last weekend.  Only the seat pan is pitted so I think the original had been damaged.  I had written that the PO had thought the starter had issues but it does crank.  Issue is electrical! Think I will need to rewire a lot if not all.   Got it to crank a bit but it quit just when it was ready to come back to life!  Hope to short the switch so I can get it running so I can start in on it when time allows.   They were asking 750.00 but in the end I got it for 550.00 with a 42" deck, dozer blade and grader blade. 

[953 nut 51,488]

           Seems like a good buy.  Here is the manual with wiring diagrams. (hope I guessed right on the year)

  

 

 

Edited September 1, 2017 by 953 nut

[JAinVA 4,619]

You did well and that model midmount is in high demand.Luck,JAinVA

[elcamino/wheelhorse 9,022]

With a little work and cleaning that will make a great tractor.

[cleat 4,936]

By the looks of the guard on the deck, it had a bagger on it at one point.

 

Does the original owner happen to have that as well ?

[drewd 55]

Hi Cleat,  unfortunately the bagger was not around any longer. However, the rear axle brackets for the dozer and grader was there and they are in great shape.