Recently Browsing 0 members
No registered users viewing this page.
Tomorrow is the first trip with equipment to the new house. One of the advantages of the brand trailer I have (Sure Trac) is that the gate can fold down onto the deck of the trailer. It will be loaded going down but empty returning, With the gate up it feels like I am still towing a parachute. The problem with having the gate down is that the trailer disappears behind my truck.
I had bought a pair of 36" snowplow marker guides for the 42" single stage snowthrower a few years ago. They were to help locate the ends when pulling into our side-load garage. But before mounting them I found a shorter pair that worked better. So the longer ones languished on the shelf until today. I had a last minute thought to mount them on the trailer. It should work great.
Hey guys, @wheelhorseman, @WVHillbilly520H, brought this stuff home today. Big question did wh make a gooseneck trailer like this? Really hope so, paint looks right and came out of the same lot as the rest of this. Owner swears he had blade and blower on the 414-8 Which means it'll fit my 312-8. He talked me (or bribed) me into taking tractor with me. Got the weights and chains too. $440 for all of it. Tractor runs but has fuel delivery problems.
Thought I'd post up some of what I consider to be really favorite hand tools I've built up over the years - the amount of stuff I've worn out is amazing and recently I've had to start replacing a lot of things . Finding good quality without going broke is tough , but here's some good examples.
One of the best places to get high precision with incredibly tough steel is Japan - their idea of a screwdriver makes the rest of the world look pathetic - Vessel is one of their top companies. Philips screws , as some may know , are designed to "cam out" at a certain torque limit. Japanese Industrial Standard cross head drivers are intended to easily exceed the torque limit of the fastener - and never slip. The angles of the tips are slightly different - use a Philips driver on anything made in Japan , such as a motorcycle or Japanese car and you'll absolutely ruin their cross-head screws. Use the right driver for the job - it really applies here.
Nice part - use that JIS cross head driver on a Philips screw, it grabs so hard they can snap the head off before slipping.
US market distributor is JDV products on the east coast - Larry is the best contact in sales and can help answer any questions. I have set up a discount code for IH8MUD members - maybe I can get him to set up a Red Square discount as well - he's done us a great service.
Take a gander at their Impacta line - it has a built in breaker mechanism in it for use with a hammer and they truly work quite well. Even the rusted, nasty screws on my old Land Cruiser snap right loose with their tools. Vessel supplied Toyota as well as KTC , Kioto and a few other companies in the included tool kits in their top line trucks and cars. The tool kits in some of the older Land Cruisers were amazing - a nice canvas roll that even included a mini grease gun . These trucks were designed to live in the worst corners of the planet and survive, nothing else like them.
Just a few of the Vessel drivers I have, didn't have an Impacta silver one handy as they live in the Cruiser at all times, lol...
My absolute favorite hand drivers I've ever used, super comfortable on the hand and excellent grip - very hard but not brittle tips that will knock the most stubborn fasteners loose easily - made by KTC with dark lacquer wood handles, beautifully built and not very easy to get . They have to come directly out of Japan - no US distributor will bring them over for some reason.
When it comes to pliers I've worn out every brand you can think of - from Crescent, Channelock, Klien and everyone else including some German built. They all wear out their teeth and really never work like they should - Knipex beats everyone as far as I'm concerned. Oldest pair I own is 8yrs old, not one sign of wear on the teeth yet and they grip far better than anyone else.
Knipex Cobra pliers - try these and you'll melt your Channelock's out of disgust - these grip far better, have a wider range, more torque transfer and far harder teeth . They hold so well they will stay on a round object by themselves.
Knipex high-leverage diagonal cutters - rated up to very hard piano wires, small bolts , ect. They can even handle my 3/32" 312 & 316 SS tig filler rod that would destroy any Channelock or Klien cutters - dented both brands on that stuff already, these handle it fine but take some force.
For that heavier 1/8 Stainless filler in higher grades, bolts or anything else that will fit in the jaws - Cobolt compound leverage cutting pliers from Knipex , love 'em and effortless in how well they work. These have been through about 4lbs of ss wire filler already as well as other odd jobs including hardened metric screws . Barely started to remove the jaw coating....lol.
Knipex 6" angled needle nose pliers w/cutter. Very well made, excellent grip strength and tips that don't wear or bend, unlike everyone else.
Knipex S shaped special needle nose pliers - these reach those pesky cotter pins and hair pin clips while allowing you to actually see what you're doing. Perfect for working on carburetors, wish I had these 25yrs ago.
More to come soon - show us your favorites, it's interesting to see opinions on different brands/uses/durability . I've learned the hard way over the years you replace cheap tools again and again, learning the whole time if you'd have bought better quality you'd have only done it once. I do have some literally throw-away stuff - and it shows it's been used for that very purpose, but I keep those cheap tools around to prevent destroying an expensive specialty tool, some of this stuff is very expensive but worth every penny when it lasts and does the job. One lousy special long-armed puller cost me $500 back in the day when I was working in the shops, but still have it and use it far more often than I'd like despite the cost, it's well paid for itself over the years. Wish now I'd spent the rest on the complete set of heads/arms/attachments - today they are worth a lot of money above what they originally cost but it's done the job well with some attachments I've made to fit it . Just pulling the hubs, steering wheels and hitch pins on the Horse was worth the cost alone.
My father wants to know if he should drive-on, or back on, to the nose of a 6 by 10 U-Haul trailer with one single tractor?
He has vast experience Towing and a very rugged vehicle with which to do so but wants to make sure that he is balanced correctly or even a little heavy on the tongue of the trailer.
The driveway of the previous owner of this tractor is nowhere near level so he wants to try to get as close as possible which is tough to do on a hill.
What are your thoughts?
By Ahead of the Curve
I am currently looking for a Rototiller , trailers and a Johnny Bucket or other front bucket that fits my 520-H's. I'm just getting back into Wheel Horses and gathering more implements. I am disabled and am really trying to save whats left of my back and heart. Please let me know if you have anything or know of anyone that does.Not sure of all the implements that was available for the 520-H's always willing for other options also.
Thanks Tim & Meranda Harper
Call or Text me at (989) 326-5571
UPDATE: I found a rototiller and 2 trailers for my 520-H. Might be interested in other trailers and still looking for a bucket. Thank you.