car 24 #1 Posted August 28, 2017 Just as the title says, I notice when I pushed in the switch to shut off the mower deck it didn't stop. Even if I back up without reaching under the seat to flip the override the deck continued to run. So yesterday I mowed with the switch in the off position, after 10 minutes or so the deck shut off. As soon as I pulled the switch to the on position the deck engaged as it should, push it in and it continued to run. Any ideas on what's going on? Share this post Link to post Share on other sites
oldlineman 1,450 #2 Posted August 28, 2017 Maybe switch is bad just something to check Share this post Link to post Share on other sites
car 24 #3 Posted August 28, 2017 Well, I started to check the switch and it looked like it controlled more than just the deck. I didn't unplug it, but it looked like it had several pins to the plug. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,481 #4 Posted August 28, 2017 I'm thinking this is the switch. Click on the pictures. Share this post Link to post Share on other sites
car 24 #5 Posted August 29, 2017 Thank for this information, I'll test it as soon as I get a chance. Share this post Link to post Share on other sites
car 24 #6 Posted December 13, 2017 It was the switch, thanks! Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,481 #7 Posted December 13, 2017 Thanks for letting us know. Your reply completes this thread on the 92-6787 replaced by 93-9998 pto switches and bound to help someone in the future. Garry Share this post Link to post Share on other sites