Jump to content
Ffarmer

16 magnum

Recommended Posts

Ffarmer

I have a 16 Magnum that will not fit a engine mount on a C 165.

Can I swap oil pans with a k341 that is in the C 165.

Share this post


Link to post
Share on other sites
 
pfrederi

Welcome to RS

 

You could swap oil pans  If teh magnum has the low oil switch you will lose that functionality and you may have to use some JB weld to block off a notch in the magnum block.  But it might be easier to do away with the isolation (cradle) mounting plate and bolt the engine directly to the frame.(Does you magnum have 2 threaded holes in the bottom of the pan on the PTO side?)  You would have to get a lower PTO mounting bracket, but that would be easy from several vendors here.

IMG_2871 copy.jpg

IMG_2872 copy.jpg

IMG_2873 copy.jpg

IMG_2874 copy.jpg

IMG_2875 copy.jpg

  • Like 5

Share this post


Link to post
Share on other sites
 
Ffarmer

Can not read the serial - spec  number on the M 16. Does not appear to have an oils switch and from your pics it looks doable. 

The K341 was run with a loose head gasket and now smokes a bit . Have not removed head for inspection , may be valve guides as it runs good with no loss of power.

Share this post


Link to post
Share on other sites
 
pfrederi

Make sure you measure the oil dipper...I seem to recall some engines had to use shorter dippers to clear the oil pan but I am not sure about that

  • Like 2

Share this post


Link to post
Share on other sites
 
Searcher60
10 hours ago, Ffarmer said:

I have a 16 Magnum that will not fit a engine mount on a C 165.

Can I swap oil pans with a k341 that is in the C 165.

 

Can I ask just where in the frekin' world you came up with a M16? I want it, now! 

Share this post


Link to post
Share on other sites
 
Ffarmer

I thought you and others would understand what I meant, but now that you are off topic my preference is a M14.

Share this post


Link to post
Share on other sites
 
Ffarmer

Bought it in Tidewater , Va........... everything  has a price. 

Share this post


Link to post
Share on other sites
 
Searcher60

I am about 30 miles from you. You want to sell it? 

Share this post


Link to post
Share on other sites
 
Ffarmer

I am not 30 miles from San Francisco , and on selling not really , want to put it on my C 165.

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • Rick3478
      By Rick3478
      For Sale NOS M12S Short Block, still in the original box.  I bought it pre-emptively when Kohler was phasing out the Magnums.  Thought I would have it on hand if one of mine needed it, or maybe I would find a tractor with a busted rod for cheap.  Neither of those things happened, the darn things just keep running.
       
      Part number 77 522 35, probably built in late '05, it's the combination replacement kit Kohler made to fit WheelHorse or Gravely, machined to bolt directly into the Gravely transaxle, but also has spacers to mount WheelHorse PTO clutch/brake.  Also has a bunch of gaskets and seals packed with it, probably all you need to install it.
       
      And it's heavy, so it's not practical for me to ship.  Buyer arrange to pick up near Elida OH, I can lift it about knee high to help load.
       
      Asking $800 or might consider trade for a good center mount grader blade.
       
       


    • mcfarmall
      By mcfarmall
      Tractor features Kohler 16hp cast iron engine, gently used 42" deck, concrete wheel weights, tire chains, new Chinesium carburetor, fuel lines and filter, new air filter, 2 new fwd/rev cams.  A starter,  some new gaskets, and miscellaneous parts.  New drive belt and all the belt idler assemblies.  Engine runs but smokes.  Great restoration candidate or a spare engine for you pullers out there.  Call, text or email for a private showing.   No offers considered unless made in person.  Buyer responsible for transportation.  Many more pictures to send to interested persons. 


    • Jeff-C175
    • Jennifer
      By Jennifer
      Husband wants some advice… lol.  So we did an engine swap today on two suburbans because we could not get the one engine to spark all the time to get it running!  The engine ran last year before parking for the winter sleep…. Points were changed out for new the engine was cleaned to make good contact has new spark plug new coil condenser we even switched out the fly wheel today thinking maybe the magnet was weak…. Advice???   It would where are you out yanking on the recoil five or so times and maybe only get the points to fire twice if you’re lucky..  checked the gap and pull again… same thing over and over!  Thanks in advance!
    • johnnymag3
      By johnnymag3
      416-8  clean machine, one owner, M16 Kohler...............no smoke, knocks, etc. Only 771 Hours.
       
      42" Rear Discharge deck   NO RUST    blades used 1 season
       
      48" plow very nice condition, 
       
      Wheel Horse weights, on tractor already
       
      AG Tires on rear,used one season, front tires great condition. Rears are filled with beet juice, done at a Dealer professionally,  ....non toxic, non corrosive.  Traction Galore !!!
       
      Machine is fully serviced, ready to work. NEEDS nothing....Look below for pictures
       
       
      JOHN   845 797 5716 cell
       
       
       
       
       
       
       
       
       
       
       
       
       
×
×
  • Create New...