slim67 2,730 #1 Posted August 1, 2017 I have a nice B-80 that I want as my pull/yard tractor. I posted pics of it when I got it. I sold the k181 out of it and recouped some money and got a nice running Command 12.5 that I want to install. I don't like battery ignitions and originally was going to go with a clone motor. Has anyone tried a swap like this? It will cost me nothing to try it anyways. Only problem could be belt and hood clearances. Share this post Link to post Share on other sites
N3PUY 1,031 #2 Posted August 1, 2017 I put a Command 11.5 into a Commando 800. It fit without problems. Had to modify the belt guard a little. 1 1 Share this post Link to post Share on other sites
slim67 2,730 #3 Posted August 1, 2017 1 hour ago, N3PUY said: I put a Command 11.5 into a Commando 800. It fit without problems. Had to modify the belt guard a little. Thanks for the info. Cool tractor! Can I trouble you for some pics? 1 Share this post Link to post Share on other sites
slim67 2,730 #5 Posted August 13, 2017 I did the engine swap and am quite happy how well it turned out. I was able to reuse everything that came off the cub except for the huge muffler I need to modify or search for something that will work. I need to hook up the throttle cable, wire the lights and cover the wiring with some corrugated wire sheath. I have a set of wheel weights to put on that are 105 lbs apiece and two more 40 lb plates that I can stack on top those. I recently picked up a nice set of 6-12 ags but they just don't look right on these style tractors with the wide front axle so I will wait for the rears to blow out from dry rot then replace them. This one is going to be a worker around my yard. 4 1 Share this post Link to post Share on other sites