40" mid mount on a 93 520H

[muz123 1,182]

How do i hook up a 40" early model grader blade on a 520H. Cant seem to hook up very easily any advice? 

Thanks, Dave

Edited July 28, 2017 by muz123

[953 nut 51,465]

You will need to run a link or chain from the lift just like the manual tells you.

 

[muz123 1,182]

9 minutes ago, 953 nut said:

You will need to run a link or chain from the lift just like the manual tells you.

 

The manual shows a bar not a chain. 

[953 nut 51,465]

The "BAR" is called a lift "LINK". If you don.t have the link you could use a chain.

[muz123 1,182]

11 minutes ago, 953 nut said:

The "BAR" is called a lift "LINK". If you don.t have the link you could use a chain.

Rather not use the chain because i would like down pressure that a chain cannot provide. Will end up creating a custom bar. 

Edited July 28, 2017 by muz123

[953 nut 51,465]

13 minutes ago, muz123 said:

end up creating a custom bar.

[wheelhorseman 3,197]

I have them if your interested here is a 

http://wheelhorsepartsandmore.com/brackets-linkages.html#!/Toro-Wheel-Horse-5678-mid-mount-grader-blade-lift-linkage/p/84954675/category=23566571

 

[muz123 1,182]

36 minutes ago, wheelhorseman said:

I have them if your interested here is a 

http://wheelhorsepartsandmore.com/brackets-linkages.html#!/Toro-Wheel-Horse-5678-mid-mount-grader-blade-lift-linkage/p/84954675/category=23566571

 

Thanks, i have the same bar and tried it. Does not work. 

[wheelhorseman 3,197]

Hmmmm interesting what does it hit on?

Edited July 28, 2017 by wheelhorseman

[muz123 1,182]

39 minutes ago, wheelhorseman said:

Hmmmm interesting what does it hit on?

Its just to long. Does not hit anything. May be only for older models? 

[953 nut 51,465]

Have you tried it in different holes on the rocker shaft?

 

[muz123 1,182]

On 7/28/2017 at 8:23 PM, 953 nut said:

Have you tried it in different holes on the rocker shaft?

 

Been trying all the holes but haven't found the right spacing of the holes.