HORSE RIDER 0 #1 Posted July 21, 2017 I have a 312 a moves great on flat ground any type of incline and its game over, anyone know if a trans. from a 518-h will work on my 312 a?? thank you for any help prett new to all of this Share this post Link to post Share on other sites
953 nut 51,015 #2 Posted July 22, 2017 It has been done before, take a look. Share this post Link to post Share on other sites
HORSE RIDER 0 #3 Posted July 22, 2017 First, Thank you for your service, I bought this 312 A for my older brother who a couple years ago came down with ms, was hard for him to mow with his old rider so I thought this mower would be better for him and it was till we found out on an incline it lost all power Share this post Link to post Share on other sites
953 nut 51,015 #4 Posted July 22, 2017 It could be a bad drive belt, not hard to replace and always a good preventive maintenance action. Here is a copy of the manual for the Eaton 700, I know that they have a history of poor performance if they have been worked too hard, but it may be something simple that will be found in the troubleshooting section. Share this post Link to post Share on other sites
HORSE RIDER 0 #5 Posted July 22, 2017 ok, will try that, thank you very much Share this post Link to post Share on other sites