BMW1 42 #1 Posted July 17, 2017 Where can I Get ball joints for a 1979 wheel horse D200 - model 91-20KS02? Share this post Link to post Share on other sites
"D"- Man 827 #2 Posted July 17, 2017 By, "ball joints" I can only assume that you mean tie rod ends or drag link ends. I am not certain that these are still available new, used would be 38+ years old. I may state as well that 2 are left threaded while the other 4 are right. They do show up on {eBay} sometimes. I will check the used ones I have to see how many are reusable. I have 2 N.O.S. Left's and 1 Right, but I don't intend to sell them. 1 Share this post Link to post Share on other sites
953 nut 51,007 #3 Posted July 17, 2017 Check with Lowell, he may have some. If not, take the old ones to a NAPA store and they should be able to match them up to an automotive application. https://www.wheelhorsepartsandmore.com/about-us.html 2 Share this post Link to post Share on other sites
Sarge 3,462 #4 Posted July 17, 2017 I ended up converting my outer ends to heim joints as there were no available replacements at that time . NOS ones show up once in awhile , have your part numbers handy . Sarge Share this post Link to post Share on other sites
BMW1 42 #5 Posted July 17, 2017 "D"-Man - Yes, that is what I meant. I saw tie rod ends on McMaster-Carr. I haven't measured the ones on my tractor to see if any of those will work though. Thanks for the suggestions. 1 Share this post Link to post Share on other sites