C125

[Big_Red_Fred 1,547]

Well fellow Horse Addicts, i young man pulled into my Truck shop at 530pm today Friday the 7th july, It has a new carb on it, its not Kohler, one of them 25 dollar specials on ebay, a piece of wire connecting govenor to carb, he said it only runs on full choke which it did, so i figure Saturday ill run a new fuel line & Filter but i gotta get carb parts, its a 12hp as you all already know, The deck raise dont work i seen and a few odds & ends, Heres sum picks, i paid 200.00, Good or bad, let me know your thoughts, Hey it was free delivery like 953nut said LOL

[Tankman 3,515]

Big Red, not a bad deal. A new Horse to "play" with! 

[Ed Kennell 35,767]

Hey Fred, we could see a lot better if you would clean the oil off the camera lens.  

[Big_Red_Fred 1,547]

LOL had a break job & wheel seals today, i will have to use the camera on tomorrows find, bringing home a 414-8 with a tiller, plow, yard sweeper, aerator, all WH of course, should i do my Mr Ed for all ? Oh Wilbur Wilbur Wilbur  Or Ed Ed Ed LOL, Hey Ed ya have any more decks laying around

600.00, not bad from a 1000.00

Red Haze, all in my Face, whats this Old Man doing in this place

[ClassicTractorProfessor 5,261]

200 bucks for that tractor is a neck of a deal...i paid 400 for my C-125...fresh rebuilt engine but tractor is rough compared to yours 

[Big_Red_Fred 1,547]

Every thing is there other then sum small parts, time to start hunting parts , carb linkage missing tho, i'll get it running smooth

[953 nut 51,657]

    You should have no problem getting that 125 running well. fresh gas with some Seafoam  may help matters. Good talking to you.

[SylvanLakeWH 24,129]

Nice!

 

LOVE them Black Hoods!!!

[pfrederi 17,147]

Looks like the front end may need an alignment.

[Big_Red_Fred 1,547]

I saw the spread on that pic to, I did it again today, went to get a 414-8, plow, tiller, rear discharge deck, think its a 38, i will post sum pics with my company cell so its not full of grease hahaha, Thanks Ed, anyways i arrived, it wouldnt start other then on WD40, looked at the farmer & said you said it ran, 1st deal we both said 600.00, i left with all at 200.00 LOL, took to my shop, pulled fuel hose at carb & cranked it over, nothing, went to C125 & did same & shot gas, put on 414-8 fired up, no smoke, ran smooth, hasnt run in 5 years, the deck is mint, no rust, i'll post sum pics, i'm getting the hang of this, You Guys are a BIG help to Old Man Red Fred

[AMC RULES 36,945]

  Curious...

if you were wearing your mask when you did that deal? 

            

[953 nut 51,657]

59 minutes ago, Big_Red_Fred said:

looked at the farmer & said you said it ran, 1st deal we both said 600.00, i left with all at 200.00

                 You bare building quite a herd there!                        

[Big_Red_Fred 1,547]

I'm Passing it down to the Oldest Son who is a Nut like the old man, To take our place on here some day, & a Soldier Like us & many more, American Made, He has the 414-8 & Loves it

I still have the C125 at shop, i need parts,  The  ( i have a loss for words, due to not much sleep & Rappn with EricJ coming home to Pa from Michigan, i think he has 3 tractors hahaha, i like you all, i should have came here 10 years ago

[Big_Red_Fred 1,547]

My Son's Stable, I'm Proud of My Soldier

[Big_Red_Fred 1,547]

Hey 953, when i had the key switch on with the C125, the coil started smoking, smoking bad, i scrambled to mean green & grabed 2 7/16 wrenches & removed pos cable, what would cause that, i gotta get parts for it since i robbed the fuel pump for 414

Edited July 9, 2017 by Big_Red_Fred

[953 nut 51,657]

7 hours ago, Big_Red_Fred said:

what would cause that,

                Probably a bad coil.   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[ebinmaine 63,116]

On 7/7/2017 at 8:19 PM, Big_Red_Fred said:

Good or bad, let me know your thoughts

GOOD

Nice find !

[Big_Red_Fred 1,547]

I found some thing today, along a river here in Pa, in a shed, maybe you Wheel Horse Surgeons can figure this Black hood out ? No Numbers, the 3 owners said if i produce a tractor so they can mow their 3 spots at river, i can have it. Here you all go. 

[953 nut 51,657]

How about the engine, what size,single or twin cylinder,type of ignition, HP, numbers on it? Little help here Fred. How about the seat pan, metal or plastic?

[SylvanLakeWH 24,129]

 

But regardless - FREE = get it!

[c-series don 7,805]

That is either a C-145 or C-165 automatic. It's not a 125 because I see it has hydraulic lift. Here's a couple of pictures of mine. Not sure why they are so grainy?

Edited July 10, 2017 by c-series don

[Big_Red_Fred 1,547]

Their digging it out for me LOL, one of the 3 said either 14 or 16hp, i'm having a coughing attach hahaha, dam dust in there about killed me, had clots in my lungs last Xmas, i think they got spit out

953, seat pan looked metal, i didnt get close enuf hahaha, started coughing, thou they were smoking like chimneys 

My Son is laughing at me

[Big_Red_Fred 1,547]

I was looking at the C125 steering today after the Mystery Machine ? Wheres the adjustment ? Just a Ball socket, them links i can get by 100's at Truck parts store LOL

[Big_Red_Fred 1,547]

Their falling from the Sky yelling Take me Fred Take me  New pick from the drunk owner, looks like a single cylinder ?

Edited July 10, 2017 by Big_Red_Fred

[c-series don 7,805]

Can't wait to see it outside and all cleaned up!