Jump to content
Greg Shearer

Exhaust k91

Recommended Posts

Greg Shearer

Exhaust gasket k91 4 horsepower Kohler and exhaust tube

Share this post


Link to post
Share on other sites
 
AMC RULES

:rolleyes: We need more to go on here.  :confusion-shrug:

  • Like 1

Share this post


Link to post
Share on other sites
 
Achto

I'm going to guess that the K91 you have was not equipped with pipe threads in the exhaust port. You can run a 1/2" pipe tap into the hole so that you can use common pipe for the exhaust. You can also make a flange to bolt to the engine with a piece of pipe welded to it to get where you need to be. As far as the gasket, I would try ebay.

  • Like 1

Share this post


Link to post
Share on other sites
 
WheelHorse79

That's what I did to the K91T I bought last year to put on my RJ-58 that had the wrong model Briggs on it.  I didn't have a tap, so I took it to a machine shop and they tapped the 1/2" pipe threads for $10.  Didn't need any gasket, just screwed the pipe elbow directly into the block.  Seems to work real well.

  • Like 1

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...