hcminis 1,530 #1 Posted May 31, 2017 Well.... the sickle bar is on the 701. Still have some minor issues. Right side foot rest is siezed in place and currently hitting the sickle bar which is preventing it from being lifted. Ordered the new belts but drive belt for motor is way to long. Missing the bar and bracket that holds the sickle in upright position. Will need those dimensions if anyone has them. The skid plate won't go on as I think someone has replaced the drive pulley which is slightly larger. But, overall it looks very cool. Doubt I'll ever use it though..... Was able to get the new seat and back rest on as well that came from David Rice . The seat patina doesn't quite match but the back rest frame and pad match almost perfectly. 9 Share this post Link to post Share on other sites
CasualObserver 3,406 #2 Posted May 31, 2017 2 hours ago, hcminis said: Will need those dimensions if anyone has them. this may help. 3 Share this post Link to post Share on other sites
hcminis 1,530 #3 Posted June 10, 2017 All issues fixed and operates great. My brother made the bracket and rod to hold the sickle bar in the upright position. Will get a video hopefully tomorrow. 2 Share this post Link to post Share on other sites
jeremi3210 688 #4 Posted June 10, 2017 (edited) Pretty simple stuff to fabricate! Hope this helps! They are a lot of fun to use! If you need sickle teeth for it Jari parts will fit on these. Edited June 10, 2017 by jeremi3210 3 Share this post Link to post Share on other sites
hcminis 1,530 #5 Posted June 12, 2017 Sickle crew out for some sun https://youtu.be/ZbLB7r00T0g Excuse the crocs and bad videographer. Hard to drive, video, and operate the sickle bar 4 Share this post Link to post Share on other sites
hcminis 1,530 #6 Posted June 20, 2017 Got the upright arm installed 3 Share this post Link to post Share on other sites
