Huntemcd 239 #1 Posted May 29, 2017 Got the front mower hooked up to the c121 today. Worked great. Just have to get it a little more level but I don't use it to mow the yard so it doesn't matter 11 Share this post Link to post Share on other sites
953 nut 51,516 #2 Posted May 29, 2017 8 minutes ago, Huntemcd said: I don't use it to mow the yard Always like to see something out of the ordinary, but agree it would probably be a bit awkward to mow with. Share this post Link to post Share on other sites
pfrederi 17,128 #3 Posted May 29, 2017 Are you missing the guide wheels. They do not carry a load but contact the ground on rough spots. Gage Wheel 5 x 1.3 inches #109375 2 Share this post Link to post Share on other sites
Huntemcd 239 #4 Posted May 29, 2017 23 minutes ago, pfrederi said: Are you missing the guide wheels. They do not carry a load but contact the ground on rough spots. Gage Wheel 5 x 1.3 inches #109375 Yes I am. I don't have the right casters either. I had to make them. Share this post Link to post Share on other sites
Adams94 1,065 #5 Posted May 29, 2017 I would like to have one to mow yard with one day. I think it would do a great job since you don't run over anything first plus great visibility Share this post Link to post Share on other sites
pfrederi 17,128 #6 Posted May 29, 2017 21 minutes ago, Huntemcd said: Yes I am. I don't have the right casters either. I had to make them. They are light duty plastic wheels. I would think a trip to Lowes/HD you could find something close enough to the WH dimensions They are not for routine lawn mowing. I think The Queen Mary had a tighter turning radius. 2 Share this post Link to post Share on other sites
Jasonhm29 1 #7 Posted August 4, 2019 I just bought this attachment and it is missing the mid mount pulley. Can someone help me find one? 1 Share this post Link to post Share on other sites
AMC RULES 36,941 #8 Posted August 4, 2019 Try placing an ad here... https://www.wheelhorseforum.com/classifieds/wanted/ Share this post Link to post Share on other sites
Huntemcd 239 #9 Posted August 4, 2019 6 hours ago, Jasonhm29 said: I just bought this attachment and it is missing the mid mount pulley. Can someone help me find one? I made mine. I took round stock then went from there. I made the front brackets for the casters too. Share this post Link to post Share on other sites
Jasonhm29 1 #10 Posted August 5, 2019 5 hours ago, Huntemcd said: I made mine. I took round stock then went from there. I made the front brackets for the casters too. Can you show be a picture of it? Share this post Link to post Share on other sites
Huntemcd 239 #11 Posted August 5, 2019 5 hours ago, Jasonhm29 said: Can you show be a picture of it? I just did all this fabricating from a pic. I’ve learned to build it and try it and if it doesn’t work then make it work Share this post Link to post Share on other sites
