Donellis 1 #1 Posted May 26, 2017 I attached a snow blower to my 516-8 and when i go to engage the pully in lock mode it wants to stall engine. Does anyone know why ? Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,478 #2 Posted May 26, 2017 The most likely cause is the seat switch does not recognize the presence of the operator. When the pto (power take off) is OFF 1/2 of the pto switch powers the engine ignition. The other 1/2 controls the starter circuit. When the pto is ON or engaged the seat switch powers the ignition. Operator falls out of seat and the engine quits. Have the long tractor model number and serial number? Should be able to find a good wiring diagram of this circuit. Garry 3 Share this post Link to post Share on other sites
Racinbob 10,256 #3 Posted May 26, 2017 But I wasn't aware of a 516-8. There was a 516H in 1988. Share this post Link to post Share on other sites