nigel 150 #1 Posted May 20, 2017 Hi can anyone on here point me in the right direction to find out the above dimensions i.e., length width ,wheelbase I can't seem to find this information any where on here many thanks nigel Share this post Link to post Share on other sites
rmaynard 14,895 #2 Posted May 20, 2017 I have one sitting on my trailer now. Give me a few minutes to go out and get some measurements for you. Hope this is what you are looking for: Width at rear fender pan = 30-1/2" Height at front of hood, not counting the hood ornament = 32" Front wheel width from outside of rim to outside of other rim is approximately 31-1/2" Rear wheel width from outside of rim to outside of other rim is approximately 30-1/2" (varies by where the hubs are mounted on the axles) Total length from the front of the front tire to rear of the rear tire is 59" Wheel base = 41" (axle to axle) 2 Share this post Link to post Share on other sites
rmaynard 14,895 #3 Posted May 20, 2017 The above dimensions are for the 1969 WorkHorse. Commando should be approximately the same. 1 Share this post Link to post Share on other sites
953 nut 51,672 #4 Posted May 20, 2017 (edited) Page 30 & 31 of this brochure has all the info you could ever ask for. Edited May 20, 2017 by 953 nut 2 Share this post Link to post Share on other sites
