War_horse86 5 #1 Posted May 19, 2017 (edited) Good afternoon guys! I have a techumseh starter 32510 that the shaft has some play and would bind up when engaging the flywheel. I have took the starter apart and confirmed the bushing is worn and one of the brushes is pretty worn. I dropped the starter off at a local shop in Columbus and they called within 3 hours stating they could not rebuild due to no parts available. I'm looking for suggestions from you all. I could head to the local bearing shop and address the bushing but it still leaves me with the what if's with the rest of the starter. Should I buy a replacement Chinese starter off ebay/other sites. I have found this information and thinking there are 3 models that would for with the raider10. Thanks everyone!! Replaces (OEM): TECUMSEH 32510 TECUMSEH 32817 TECUMSEH 33835 Fits Models: TECUMSEH OH120, OH140, OH160, OH180, HH and VH 11 tooth gear Edited May 19, 2017 by War_horse86 Share this post Link to post Share on other sites
woodchuckfarmer 333 #2 Posted May 19, 2017 Try D B Electrical for a starter. 1 Share this post Link to post Share on other sites