nylyon-(Admin) 7,114 #1 Posted May 16, 2017 A while back I was the happy recipient of a 1995 312-8. The engine had a very bad wobble, so it sat parked. Recently I obtained another Magnum 12 which runs perfectly so I switched. Later today the 312 will be setup with my older (1994) 42" RD deck and will begin lawn duty. It looks like it got a little sun bleached, but very little surface rust! 18 Share this post Link to post Share on other sites
nylyon-(Admin) 7,114 #2 Posted May 16, 2017 Got the deck on and replaced the drive belt and idler pulley. From sitting things were a little tight, so greased everything (think it may have been the first time for the steering) and gave a touch of oil on the clutch linkage and brake linkage. Went out and gave a quick cut through some of the lawn, and it definitely slows down more than the 416, but all in all it did a nice job. One question though I wasn't able to adjust the deck stop. I turned the adjustment all the way and the little rubber stops are still ¼ inch from the foot boards. On the 416, they touched, any thoughts on why? Share this post Link to post Share on other sites
slammer302 2,154 #3 Posted May 16, 2017 My 310-8 with 42" RD is the same. Share this post Link to post Share on other sites
Tankman 3,515 #4 Posted May 17, 2017 Looks great! Only problem I see, those "T" decals. 1 Share this post Link to post Share on other sites
nylyon-(Admin) 7,114 #5 Posted May 17, 2017 That's the best part! Share this post Link to post Share on other sites
slammer302 2,154 #6 Posted May 17, 2017 I do like the seat & fat steering wheel on the 90's wheel horse Share this post Link to post Share on other sites
nylyon-(Admin) 7,114 #7 Posted May 18, 2017 I just finished up a few hours of mowing, and it does a nice job, pretty solid machine! 1 Share this post Link to post Share on other sites
