Jump to content
redone

No spark but turns over

Recommended Posts

redone

Hi everyone. I just rebuilt a k181s,. It ran on the bench just fine. Bolted out to the WH B80 hook all wires and ran test on connections. I don't have power to the coil. So no spark to plug. Would this be a safety switch under seat, or on the foot clutch pedal. I heading to out tractor show near Rockford Illinois in May. This was a winter project...all nicely painted up and ready to go.

Thanks Guys

Bill

 

 

 

 

  • Like 1

Share this post


Link to post
Share on other sites
 
oldredrider

You're on the right track about the safety switchs. Also check PTO lever position (off).

Share this post


Link to post
Share on other sites
 
gwest_ca

On most models 1/2 of the pto switch and the seat switch controls the ignition.

The other 1/2 of the pto switch with the clutch pedal switch or neutral switch on the auto models control the starter.

 

Easy to remember. Operator falls out of seat and the engine quits.

 

Garry

  • Like 1

Share this post


Link to post
Share on other sites
 
953 nut

Let us know what model the 181 is in and we can walk you through the trouble shooting to get it running. 

Share this post


Link to post
Share on other sites
 
redone

Hi Guys. Model number is k181s. For my B80 WH. Safety switches. I thought so. This tractor was driven into the shop .all I did was turn it off, got busy taking it apart, and rebuilt the engine. 

I know we get older, but the parts never change. Ok test lamp here we go..

Thank to all you guys..

Big help....

Bill

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...