stevebo-(Moderator) 8,038 #1 Posted February 4, 2017 So I posted in "what's in your mirror" this nice original 1989 520 HC. It came with a really clean 60" deck. I broke the nipple off the fuel pump when as I was changing the fuel line so $14 bucks later the new one arrived in the mail today. Put it on and fired it up. It was too cold today to degrease and pressure wash it but I was able to start buffing the hood with a high cutting compound and it is going to clean up real nice. Good news is the tranny is strong but bad news is the engine runs real strong but puffs a bit. Good news is I have another low hour Onan on the shelf that I can swap out. Hopefully tomorrow it warms up enough that I can pressure wash it. We shall see. 21 Share this post Link to post Share on other sites
Wishin4a416 2,185 #2 Posted February 4, 2017 Nice Steve. Looks like it will buff up real nice. Your stocked up on blinds also. 1 Share this post Link to post Share on other sites
stevebo-(Moderator) 8,038 #3 Posted February 4, 2017 9 minutes ago, Wishin4a416 said: Nice Steve. Looks like it will buff up real nice. Your stocked up on blinds also. You are correct and have an eagle eye. They were special ordered from Lowes for the windows on the lower level. Guy came today to install and of course two of the double wide ones were about 12" too short. That is the EXACT reason why I decided to pay them to measure and install. That could have been about an $800 mistake.... 3 Share this post Link to post Share on other sites
WVHillbilly520H 10,369 #4 Posted February 4, 2017 Those 60" decks look humongous on the 520s compared to the 5xi's, kinda glad I only have 48" decks for the classics, BTW it's a very nice looking , as well as the fastest of the 520s, Jeff. 3 Share this post Link to post Share on other sites
JackC 616 #5 Posted February 4, 2017 Looks like a very nice original HC. That is not your first HC is it? I have 4. Two 88s and two 89s. Share this post Link to post Share on other sites
Sparky-(Admin) 19,528 #6 Posted February 4, 2017 Nice score Steve.....how far did ya drive for this one? Mike...... 1 Share this post Link to post Share on other sites
Aldon 4,826 #7 Posted February 4, 2017 Looks like your stables getting crowded. I can give the C160 a nice home:-) And congrats on the HC. Nice way to start the year! 1 Share this post Link to post Share on other sites
stevebo-(Moderator) 8,038 #8 Posted February 4, 2017 28 minutes ago, JackC said: Looks like a very nice original HC. That is not your first HC is it? I have 4. Two 88s and two 89s. This is my second. I have a 1988 that I restored about 7-8 years ago and has since become my back up mower. I also used to have my custom 3 point hitch on it. I plan on putting that on this one. 18 minutes ago, Sparky said: Nice score Steve.....how far did ya drive for this one? Mike...... This one was on ebay in Middlebury so not far at all. Off exit 17 on Rt 84. 2 minutes ago, Aldon said: Looks like your stables getting crowded. I can give the C160 a nice home:-) That C160 is a dibs tractor so I have been told by my good friend Kenb. That one was done right. The PO did a full blown mechanical and cosmetic restore on it. Not perfect but really nice. 2 Share this post Link to post Share on other sites
jay bee 817 #9 Posted February 4, 2017 1 hour ago, stevebo said: That is the EXACT reason why I decided to pay them to measure and install. Really nice score on the 520 and a beautiful C-160. On the blinds...I had the same type experience on some complicated custom counter tops. They wanted me to bring in the measurements and I said "no, you come out and measure". Sure enough, they had to make all the counter tops TWICE!!! But not on my dime... Jim 4 Share this post Link to post Share on other sites
AMC RULES 36,945 #10 Posted February 4, 2017 Imagine how many people get raked over the coals... not knowing that little trade secret. Nice score, & good tip Steve. 1 Share this post Link to post Share on other sites
JimD 3,345 #11 Posted February 4, 2017 Nice grab Steve. She's a dandy for sure. 1 Share this post Link to post Share on other sites
Retired Wrencher 4,876 #12 Posted February 4, 2017 Looks great Steve. A little puff once in a while keeps the bugs away. Enjoy it. 2 Share this post Link to post Share on other sites
SylvanLakeWH 24,105 #13 Posted February 4, 2017 9 hours ago, jay bee said: Really nice score on the 520 and a beautiful C-160. On the blinds...I had the same type experience on some complicated custom counter tops. They wanted me to bring in the measurements and I said "no, you come out and measure". Sure enough, they had to make all the counter tops TWICE!!! But not on my dime... Jim Countertop wrong size? SAME here! I thought the contractor was gonna cry when I showed him the new granite was 12" too short off HIS measuring sheet. Then they chipped the corner on the new one when they installed it!!! Third times the charm - on their dime... 3 Share this post Link to post Share on other sites
Pollack Pete 2,273 #14 Posted February 4, 2017 VERY nice 520-HC.You better slow down on the buffing............you'll have to wear sunglasses when you use it.Have fun with your new toy.I wouldn't mind having a 520-HC.I have four or 5 520-H's.Love those Onan's.I know most folks here don't,but I do. 3 Share this post Link to post Share on other sites
DennisThornton 4,769 #15 Posted February 4, 2017 Nice! Got any pictures of that "custom 3 point hitch"? 1 Share this post Link to post Share on other sites
elliot ness 1,916 #16 Posted February 4, 2017 Sweet Score, nice 520HC. Share this post Link to post Share on other sites
stevebo-(Moderator) 8,038 #17 Posted February 4, 2017 7 minutes ago, DennisThornton said: Nice! Got any pictures of that "custom 3 point hitch"? None right now but you might find a thread here under 520 3 point hitch or stevebo's 3 point hitch 9 minutes ago, DennisThornton said: Nice! Got any pictures of that "custom 3 point hitch"? Here you go. 1 Share this post Link to post Share on other sites
ztnoo 2,298 #18 Posted February 4, 2017 Steve, nice find. I bet you'll have it looking almost new before you are finished "detailing". They say the only difference between men and boys is the price of their toys.......... Regards, Steve 2 Share this post Link to post Share on other sites
stevebo-(Moderator) 8,038 #19 Posted February 5, 2017 I was able to get the pressure washer out today and clean all the years of crude off and butt if. Looking prettygood for a worker. 7 Share this post Link to post Share on other sites
1995 520H+96+97 935 #20 Posted February 5, 2017 That cleaned up to new. Share this post Link to post Share on other sites
953 nut 51,614 #21 Posted February 5, 2017 22 hours ago, stevebo said: None right now but you might find a thread here under 520 3 point hitch or stevebo's 3 point hitch The video has been deleted; Share this post Link to post Share on other sites
stevebo-(Moderator) 8,038 #22 Posted February 5, 2017 I did not take the video and don't have it nor any pictures. Share this post Link to post Share on other sites
fast88pu 3,313 #23 Posted February 5, 2017 12 hours ago, stevebo said: I was able to get the pressure washer out today and clean all the years of crude off and butt if. Looking prettygood for a worker. Are boat seats the new thing? 1 Share this post Link to post Share on other sites
SylvanLakeWH 24,105 #24 Posted February 5, 2017 5 minutes ago, fast88pu said: Are boat seats the new thing? Apparently the Ponds were fond of "pond" skating...This little known add on was designed to keep your safe if you go through the ice while plowing a skating rink for the youngsters... Depending on how deep the water is, you can also hook a boat seat cushion to a winch cable. When the tractor sinks the seat will float, pulling the cable to the surface, providing an easy lift point to haul it back out. The really fancy models are completely water proof, so when the cushion reaches the top it switches the winch on and pulls the tractor out by itself. The entire rig is available from Toro as NOS Pt # snkurWHrtvlsystm 101-SHLWTR or 102-DPWTR depending on how long you want the cable to be... 3 Share this post Link to post Share on other sites
fast88pu 3,313 #25 Posted February 5, 2017 Does it also come with a dive team? 1 Share this post Link to post Share on other sites