fast88pu 3,313 #1 Posted January 15, 2017 Are these inside and outside cast wheel horse weights? I've never seen the ones with the notch for the valve stem before. Rare?? 4 Share this post Link to post Share on other sites
953 nut 51,465 #2 Posted January 15, 2017 Some rims have the valve on the outside (deep side) of the rim, 1267 did. Share this post Link to post Share on other sites
new2horses 287 #3 Posted January 15, 2017 I've been told that the weights with the notch were made for the "D" series. Wheel Horse none the less. Share this post Link to post Share on other sites
fast88pu 3,313 #4 Posted January 15, 2017 I didn't think about the d series rims Share this post Link to post Share on other sites
857 horse 2,581 #5 Posted January 15, 2017 My 857 has a set on the inside and outside..........I will go look,,,,,, Share this post Link to post Share on other sites
squonk 38,842 #6 Posted January 15, 2017 I don't believe those weights were actually made by . I have seen many makes of garden tractors with the same weights. As a matter of fact 1 set I have came off of a Cub Cadet and the guy who had them said they were off his tractor that he bought brand new in the early 70's. 1 Share this post Link to post Share on other sites
fast88pu 3,313 #7 Posted January 15, 2017 I got them at a wheel horse dealer and were still in the wheel horse box 3 Share this post Link to post Share on other sites
squonk 38,842 #8 Posted January 15, 2017 (edited) 17 minutes ago, fast88pu said: I got them at a wheel horse dealer and were still in the wheel horse box More than likely an independent co. made them for the various tractor manufacturers and boxed them up with the correct co. logo. Kind of like how Allied made a lot of the WH implements and later on Ohio Steel. Edited January 15, 2017 by squonk 2 Share this post Link to post Share on other sites
whfan74 2,015 #9 Posted January 18, 2017 They are both outside weights. Share this post Link to post Share on other sites
Tankman 3,515 #10 Posted January 25, 2017 On 1/18/2017 at 9:54 AM, whfan74 said: They are both outside weights. I believe the inside weights are two piece. Never tried inside weights. Use wheel weights for pushin' snow, gravel. dirt. Always front weights when turnin' earth. Made a front bumper that'll support suitcase weights. Share this post Link to post Share on other sites
