Schuelke001 0 #1 Posted January 7, 2017 I have a 1974 C100 8- speed wheelhorse. I just rebuilt the transmission and somehow don't have the breaks hooked up correctly. Must be getting old! I press on the break peddle and it goes to the floor and does not come back up. I need a schematic of what it looks like under the panel where the shifter and high/low levers are. I also have no parking brake. Can anyone help with a layout? Share this post Link to post Share on other sites
953 nut 51,464 #2 Posted January 7, 2017 This should give you the information you need. Share this post Link to post Share on other sites
Texas Todd 1,024 #3 Posted January 7, 2017 I took this picture of my C-160 before taking it apart. It may or not be the same. Saved my bacon when I went back to put it together again. 2 Share this post Link to post Share on other sites
stevasaurus 22,229 #4 Posted January 9, 2017 Chuck, did you get your linkage thingy straightened out?? I just saw the e-mails yesterday...sorry. Share this post Link to post Share on other sites