Garden Plow

[Joebag 17]

How can I convert the brinly plow to fit in my 876 slot hitch without buying a Clevis hitch. I do not have a welder nor do I know of anyone that does. Also how to make a coulter wheel so as to help guide the plow. I have it hooked up this way before now it does so so.

[WVHillbilly520H 10,369]

Brinly.com , still sells parts for these plows such as the coulter wheel and "U" clamp that holds it to the frame, now the slot hitch part that bolts in place of the clevis three hole other guys on here may be able to help you there whether having one for sale or ways to make it yourself, or our vendors section "wheelhorseman 1000" slot hitch to clevis hitch adapter,Jeff.

Edited January 4, 2017 by WVHillbilly520H

[Joebag 17]

Thnx jeff

[R. L. Addison 299]

Brinley sold an adapter (HH180 I think) to do just that. I do not think I have any info, but  maybe one of the older-timers on here could help you out. I could give you a picture if that would help. Found what I thought was gone forever. Right #

Edited January 7, 2017 by R. L. Addison

[Tankman 3,515]

Think front weights! I've had my Stallion's nose up in the air a few times until I added weight up front.

[brandonozz 168]

Joebag,

You can add the Coulter wheel but it won't really keep the plow straight.  It's just designed to cut the sod.  The slide on the bottom of the plow will keep it straight if you get it adjusted properly and down in the ground.

Edited January 8, 2017 by brandonozz