Snowthrower lift spring question

[ti-jean 44]

Hi after blowing snow today ..I look under the tractor and a spring was hunging, it was the lift rod assist spring it was attache to the lift rod i cant not figure where is suppose to attache my blower is 0644sc01

 

thank for help help 

[gwest_ca-(File Mod) 10,491]

Manuals help?

Garry

[pfrederi 17,146]

It hooks over the 3/4" shaft that the brake clutch work on

[ti-jean 44]

 thank Garry I already have that manual the problem all the pics are dark it is hard to see where that spring gos I se on the lift rod ok but at the front very difficult .and to front hand is break any pics of that piece 

 

thank 

Edited December 18, 2016 by ti-jean

[gwest_ca-(File Mod) 10,491]

This later one may be better. The model number changed but the product is likely the same.

Garry

 

Good drawing on page 8. Hope it is the same.

[pfrederi 17,146]

Sorry I was wrong I didn't notice you had a 2 Stage blower.

[ti-jean 44]

Wow ! this manual is greater then the one I got ...no problem I think the attachement are the same 

 

thank 

Edited December 19, 2016 by ti-jean

[wallfish 15,918]

The lift spring on my 2 stage doesn't connect to the lift rod. It connects from the blower frame up to a rod at the Tach a matic area on the PTO side. Mine is a hydraulic lift tractor so could be something else for a manual lift.   There are only 2 springs on mine. That lift spring and the belt tension spring.

[ti-jean 44]

Ok Wow ! this manual is greater then the one I got ...Oh  I se I think the attachment are the same as a two stage blower  

 

thank 

Edited December 19, 2016 by ti-jean