Jump to content
Bowdoinham Dan

Mounting Instructions

Recommended Posts

Bowdoinham Dan

Does anyone know where I can find mounting instructions for my dozer blade?  It's on an A-frame mount, model 6-4113 7.  I have a Raider 10 tractor.

Share this post


Link to post
Share on other sites
 
Racinbob

Here ya go:

 

 

Share this post


Link to post
Share on other sites
 
Bowdoinham Dan

Thanks--I've seen this file.  It describes how to put the blade on the frame, but I'm looking for instructions for mounting it onto the tractor.  Does such a manual exist?

Share this post


Link to post
Share on other sites
 
Racinbob

I see what you're saying. Use this one. Different number but that doesn't matter.

 

 

Share this post


Link to post
Share on other sites
 
 
gwest_ca

Here is the other half of the 6-4113 plow package

Garry

Share this post


Link to post
Share on other sites
 
 
AMC RULES

 

Share this post


Link to post
Share on other sites
 
jeff lary

Dan is that Bowdoinham Maine by any chance? I have an Uncle that lives down there.

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • loudtractor
      By loudtractor
      96-42BA01 plow. Brand new in box. I assembled to make sure all parts were included. Did have to add a trip spring, spring rod, and index rod. Someone "borrowed" them as it sat in the warehouse for 50 years. Box is a bit rough, but I could reinforce it for transport. I will disassemble it, need workbench space.
      Made for (per manual):
      1974 A800,
      1975 A80
      1976-7 A90 A100
      I believe vertical shaft tractors. Maybe others?
      Thanks for looking
      Matt 





    • 87buickt
      By 87buickt
      Listing for a friend, late 70s I believe D200 deck and plow. Been sitting for a while, make reasonable offer, friend also has tons of literature he may part with, if Interested let me know

    • Donavon
      By Donavon
      Need ideas to convert my 1054 A Frame plow into a snow blower
      Any idea's?
    • RJ Hamner
      By RJ Hamner
      Will the plow I am using on my C121 and C160 work on a 876?  
      or is the plow frame different?
      Thanks
      Bob
    • Nuzmuz
      By Nuzmuz
      Just wanted to show a modification I did to my 1990 310-8. I recently picked up a 36” tiller for my horse and I tried it out on my new garden area. After hitting a rock, it knocked one of the axle brackets open dropping the right side of the tiller. On a manual I viewed, it had clevis pins to hold the lever in, but my bracket did not have them. I drilled a 1/4” hole through on each lever and mounted a 1/4” clevis pin and hairpin cotter to reinforce the lever. I read on another post to just tighten the bolts on the levers, but I think this will work a little better. Hope this helps someone!



×
×
  • Create New...