Guest Whbelguim #1 Posted September 25, 2016 after searching a long time I have a very old wheel horse found RJ was sold earlier novel in belgium at an old daeler I've got that old photo of the same wheel horse as on the old photo finally extended the collection with something special. I have a few questions that I can find a serial number decal it is in fact way too I would have liked some detail pictures of how the exhaust is made Thanks Share this post Link to post Share on other sites
Wishin4a416 2,185 #2 Posted September 25, 2016 Very nice early machine there! Something to be proud of. 2 Share this post Link to post Share on other sites
ACman 7,505 #3 Posted September 25, 2016 (edited) @Whbelguim Great find with history , provenance and probably pretty rare in Belgium . How long did it take to track that RJ down ? Also could you post that first pic in the vintage pics thread (it's in the wheel horse tractor section) and any info or dealership if you have any . Look through the photo archive you may find some pics of the exhaust or use the search box and type in RJ exhaust something should pop up . If the I.d. Sticker is still there it should be in front of engine on the left frame rail . Congratulations on your ! Edited September 26, 2016 by ACman 3 Share this post Link to post Share on other sites
AMC RULES 36,945 #4 Posted September 25, 2016 (edited) Looks like the engine was replaced at some point in it's past life... is the exhaust port threaded on that engine? If not... Wallfish(John) is describing the process of tapping the exhaust threads in post #12 here. Edited September 25, 2016 by AMC RULES Share this post Link to post Share on other sites
953 nut 51,614 #5 Posted September 25, 2016 Here is a shot from a posting today; not the best picture but shows what the exhaust looks like. 1 Share this post Link to post Share on other sites
Guest Whbelguim #6 Posted October 1, 2016 On 25-9-2016 at 11:49 PM, 953 nut said: Here is a shot from a posting today; not the best picture but shows what the exhaust looks like. thanks Share this post Link to post Share on other sites
Guest Whbelguim #7 Posted January 15, 2017 On 1-10-2016 at 8:52 PM, Whbelguim said: thanks Share this post Link to post Share on other sites