geminiguy 0 #1 Posted August 27, 2016 C160, about 1975. I am in need of a transmission case gasket. For sealing the two halfs. Anyone now of a source ? Thanks.. Share this post Link to post Share on other sites
rjg854 10,737 #2 Posted August 27, 2016 you could also post an ad in the wanted section Share this post Link to post Share on other sites
rmaynard 14,897 #3 Posted August 27, 2016 (edited) Do you have an 8-speed or hydro? I know that the gasket for the 8-speed is still available from Toro. Part #3912 Edited August 27, 2016 by rmaynard Share this post Link to post Share on other sites
geminiguy 0 #4 Posted August 27, 2016 OIpps, I should have mentioned it is a Hydro.... Share this post Link to post Share on other sites
KC9KAS 4,741 #5 Posted August 27, 2016 @geminiguy 1 Share this post Link to post Share on other sites
BOB ELLISON 2,976 #7 Posted August 31, 2016 Make your own A very smart man here on redsqure told me to get a case of pop and make the gasket out of , Well he said a case of beer but I don't drink so it's pop. The pop case is very thin and strong .works great I did my c160 hydro this way and not one drop has hit the floor . 2 Share this post Link to post Share on other sites
oldredrider 2,547 #8 Posted August 31, 2016 I've seen gaskets in hydrostatics made of beer cases. It's not pretty when they deteriorate and trash the motor and pump. Do yourself a favor and use gasket material from any auto parts store. 3 Share this post Link to post Share on other sites
BOB ELLISON 2,976 #9 Posted August 31, 2016 11 hours ago, oldredrider said: I've seen gaskets in hydrostatics made of beer cases. It's not pretty when they deteriorate and trash the motor and pump. Do yourself a favor and use gasket material from any auto parts store. Make your own A very smart man here on redsqure told me to get a case of pop and make the gasket out of , Well he said a case of beer but I don't drink so it's pop. The pop case is very thin and strong .works great I did my c160 hydro this way and not one drop has hit the floor . I have to agree with you oldredrider . Using gasket material is the way to go. 2 Share this post Link to post Share on other sites
Thisguyisnew 114 #10 Posted August 31, 2016 I also would like to know of a source. I don't have a problem now but one of my hubs came with a bolt pinned through axel and would like to have parts on hand Share this post Link to post Share on other sites
Racinbob 10,277 #11 Posted August 31, 2016 It doesn't look like they are available if I picked the right transmission. As others have said, go to an auto parts store and get some gasket material. It only takes a few minutes to make one. 1 Share this post Link to post Share on other sites
can whlvr 991 #12 Posted September 1, 2016 (edited) I made mine several years ago for my 1975 c 160 auto as the factory no longer offered it Edited September 1, 2016 by can whlvr 1 Share this post Link to post Share on other sites
