Jump to content
Vrocko

B-80 spindle bearings

Recommended Posts

Vrocko

I have a 75 B-80.Trying to replace the bearings in the main drive pulley.What direction do i drive the shaft out of the spindle.

Share this post


Link to post
Share on other sites
 
daveoman1966

What mower deck are you working with?   36"  42"  Are they cast iron spindles, or made of alum / pot metal? 

  • Like 1

Share this post


Link to post
Share on other sites
 
KC9KAS
  • Like 1

Share this post


Link to post
Share on other sites
 
Vrocko

Sorry Daveoman1966 the site would not let me respond. It's a 36 deck. It's cast iron. I got the sleeve out of the spindle. How do I go about removing the bearings.Heres a pic. 

image.jpeg

Share this post


Link to post
Share on other sites
 
gwest_ca

That looks like the 103119 bearing that Toro no longer carries. Still available from others including Napa

https://www.rcpw.com/search/?quest=103119

 

It comes with the shaft.

Check a parts list if you know the model number of your deck.

 

Garry

  • Like 1

Share this post


Link to post
Share on other sites
 
daveoman1966

EBAY HAS THEM TOO..    JUST SEARCH ON BEARING 103119.   AROUND $40 BUX EACH...;SET OF 3 FOR $80 OR SO.

THERE IS A RIGHT AND WRONG WAY TO PRESS THE BEARING BACK INTO THE HOUSING....NOTE THE LOCATION OF THE "RING-AROUND-THE BEARING".

iT MUST BE ON THE TOP SIDE OF THE HOUSING

101525B.jpg

  • Like 1

Share this post


Link to post
Share on other sites
 
Vrocko

Thanks for the help. I'm well on my way to resurrecting this family heirloom. 

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...