Jump to content
ikbendennis

Broken wheel hub wheelhorse raider 12

Recommended Posts

ikbendennis

and thats for the hi and low ?? 

Share this post


Link to post
Share on other sites
 
stevasaurus

No, that is to show you what an 1" looks like.  You do not and can not have a hi/low in that transmission.  :)  I am still trying to verify the diameter of your axles.  Did you find a model number?  Did you look at the link??

Edited by stevasaurus

Share this post


Link to post
Share on other sites
 
ikbendennis

okey but my axel less than 1 inch is that possible ?

Share this post


Link to post
Share on other sites
 
stevasaurus

No it is not possible.  It is either 1" or it is 1 1/8"...that is all it can be.  It looks like it is 1" and that would be right for that transmission.  :)

 

Share this post


Link to post
Share on other sites
 
ikbendennis

but is strange it is 23 mm so less than 1 inch 

Share this post


Link to post
Share on other sites
 
stevasaurus

Maybe your old hub wore down the axle.  Try measuring the other side.  Did you find a model number for your horse??  Also try measuring around the axle...the circumference...should be 79.7mm.  Try different places on the axle.  :)

Edited by stevasaurus

Share this post


Link to post
Share on other sites
 
ikbendennis

the other side i cant get it off its stuck i find some model numbers its a 1971 wheelhorse raider 12 whit a 4 speed trans and a 12 hp kohler engine and do u know that the original seat is for a wheelhorse ?? 

  • Like 1

Share this post


Link to post
Share on other sites
 
stevasaurus

Here is mine, but it is a 1972.

2008_071910raider19720008.jpg

 

This seat, one of Scott's horses, is another common seat to the Raiders.  :)

 

image.jpg

Share this post


Link to post
Share on other sites
 
Anglo Traction

Hi, Your Tractor is unlikely to be earlier than 1973. It has the later PTO Control and the Hood Decals introduced that year.

The seats were usually sourced from the UK, as was your Steering Wheel. Your seat would have looked like mine on this 1974 12hp (Belgium Assembled)-

DSC01082.JPG 

Pre 1972 Decals looked like this (also note the same steering wheel as yours-

DSC01083.JPG

The Seats are still available new HERE if you wish to obtain one from the UK....may also be available in the Netherlands?.

 

  • Like 1

Share this post


Link to post
Share on other sites
 
ikbendennis

That's a nice tractor that you have my tractor is from 1971 I will look for that seat here in the Netherlands 

Share this post


Link to post
Share on other sites
 
ikbendennis

and what for kind oil do u guys use for the transmission and the engine ?? 

Share this post


Link to post
Share on other sites
 
stevasaurus

90 wt in the trans...30wt in the engine  :)

 

Share this post


Link to post
Share on other sites
 
ikbendennis

my wheel hub is fixed !! we have made one out of a car axle shaft B0xhR6l.jpgTH7jhdZ.jpg 

  • Like 2

Share this post


Link to post
Share on other sites
 
Achto

Very nice job!:handgestures-thumbupright: Your new steel hub will probably out last the cast one by far.

  • Like 1

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...