clueless 2,898 #1 Posted July 28, 2016 Recently picked up a B80, runs good, gonna use it as a worker. I'm replacing a few gaskets, carburetor, and some wiring. Draining the trans and refilling it, should be good to go. A few months back I got a great deal on a little used 1996 Tiller with all the attachments. The B80 is an 8 speed and I know the 8HP is little small, but I would like to use the tiller on the B80. The soil down here is sandy so I think 8HP will work ok. Any thoughts? -Chris 4 Share this post Link to post Share on other sites
T-Mo-(Moderator) 4,345 #2 Posted July 28, 2016 Here's a video of a B-80 tilling. I also seen other videos of a B-80 using a tiller. 3 Share this post Link to post Share on other sites
JimD 3,345 #3 Posted July 28, 2016 Well that doesn't leave any doubt! 2 Share this post Link to post Share on other sites
Pullstart 59,720 #4 Posted July 28, 2016 I've got an 8 speed / 8 horse in my 502 and with some creative pulley works was able to mount and work a late model tiller without any hassle until I acquired a C-101 to take over the hard work... Go for it! 2 Share this post Link to post Share on other sites
slammer302 2,154 #5 Posted July 28, 2016 Should work fine Share this post Link to post Share on other sites
