Jump to content
Sign in to follow this  
Followers 0
Peter G.

37" Mower Deck issues

By Peter G., in Implements and Attachments

Recommended Posts

Peter G.    0

Peter G.
Posted

I have a 250 series mower deck, 37", that's in need of parts.  I'm told that the parts are discontinued and not available.  Several years ago, you guys helped me out when I need to replace the transmission in my tractor. 252H.  You were a big help.  So, once again I'm turning to you for help.  I have a mower deck which needs the Jack Shaft bearing and pulleys replaced.  The serial number of the mower deck is: 0537SK01-80985.  Where can I get parts or find a used mower deck for my beloved tractor?  Any help will be appreciated.

Share this post

Link to post
Share on other sites
 

stevasaurus    22,229

stevasaurus
Posted

Here is a copy of the manual for your deck so the members can look and it will be easier for them to help.  :)  Welcome back to Red Square.  It might also help to place a "Want Ad" for the deck in the classifieds.

 

 

Share this post

Link to post
Share on other sites
 

Peter G.    0

Peter G.
Posted

Thanks for the help and the advise!  These are the parts I will need:

 

110505 BRG INTEGRAL SHAFT 1
 936021 Snap Ring 1

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0
Go To Topic Listing

  • Similar Content

    • MSBiker
      67 Lawn Ranger Mower Deck Blades
      By MSBiker
      Well it looks like I'm out of luck. I have been looking for blades for my Lawn Ranger and having zero luck. I have tried Wheel Horse part numbers 7908, 7909. Toro part numbers 8777, and 53322 and no one has anything like this. I was thinking about doing a cut down, but finding right hand and left hand blades seems to be the problem. 
      Anyone making blades, constructing blades, got a work around, etc? My blades are usable, but that is about it. 
    • Brockport Bill
      48" Mower Deck - used 1 Season
      By Brockport Bill
      48" Mower Deck - Side Discharge model # 78361 -- # 312000163. This mower is listed as being manufactured at the near end of Wheel Horse production for this deck in 2012. This mower is in very good condition used only one season on small yard. Well cared for and stored indoors. The deck has double right side pulley for optional bagger attachment. Any owner who cares for this mower will have a great investment of a classic WH deck to last decades. Cash pick up Poughkeepsie, NY area. No returns. Please send p.m if interested



    • jmack
      Xi V-Belt Size to Connect 60” Deck
      By jmack
      What’s the correct v-belt size for a xi drive belt connecting to a 60” deck?  
       
      Just shredded mine today. 
    • BrianKoch
      Is my mower deck set up wrong?
      By BrianKoch
      Gentlemen,
       
      I’m having trouble with getting my deck to raise up and lock and I think it might have to do with the deck being incorrectly set up. 
       
      Based on the picture, does my mower deck look incorrectly positioned? That is, should the pivoting support bar be positioned above or below the wheel support pin? 
       
      Brian

    • Brockport Bill
      Mower Deck
      By Brockport Bill
      Wheel Horse Mower Deck - Rear Discharge - was used all last season - terrific cut, NO rust holes. Blades, pulleys, good condition. Pulley/belt safety covers included. Belt included, underneath cleaned -- Model # 05-36mr04 -  Cash pick up $415, near Poughkeepsie, NY. No guarantees, no returns. Please send p.m if interested.

×
×
  • Create New...