car 24 #1 Posted June 25, 2016 My steering shaft is start to catch on the gear sector plate. I can see wear on the shaft gear so a grease it really good. How hard is it to pull and replace the lower shaft? Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,485 #2 Posted June 25, 2016 Perhaps there is something in the service manual Garry Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,485 #3 Posted June 26, 2016 What is your tractor's model number and serial number? Would like to look at the correct parts list. Garry Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,485 #5 Posted June 26, 2016 This subject seems to be well covered in Section 2 of the service manual. Garry Share this post Link to post Share on other sites
car 24 #6 Posted June 27, 2016 Yes it does. Thanks for posting the service manual. I haven't tried using it since I greased it. If it works ok I'll wait until winter to work on it. Thanks again car Share this post Link to post Share on other sites
car 24 #7 Posted July 19, 2016 Couldn't wait until winter lol. It took a while to do the job but I got it done. Thanks for your help!! Share this post Link to post Share on other sites
