russellmc301 600 #76 Posted July 22, 2016 well im not sure how i i could get mine to look like that. do you know where i could get one? Share this post Link to post Share on other sites
russellmc301 600 #77 Posted July 23, 2016 is there many good parts on this tractor? how much would it be worth? missing fly wheel and shroud. i most likely wouldn't get this but just wondering Share this post Link to post Share on other sites
psalms83:18 174 #78 Posted July 23, 2016 1 minute ago, russellmc301 said: is there many good parts on this tractor? how much would it be worth? missing fly wheel and shroud. i most likely wouldn't get this but just wondering It's all looking good I'd be interested in the hood and dual wheels and motor and tranny well pretty much I'd pay up to 200 for all of it!!! and I'm sure others would pay upwards of 400 Share this post Link to post Share on other sites
russellmc301 600 #79 Posted July 28, 2016 well i cleaned my gun today and then primed the hood and seat plus some other things. then ran out of primer and last night i had ordered more. it's amazing all the in perfections you see when you prime the hood. going to weld some more tomarrow. 2 Share this post Link to post Share on other sites
953 nut 51,630 #80 Posted July 28, 2016 On 7/23/2016 at 4:23 PM, russellmc301 said: many good parts on this tractor? Too bad they cut up the back of that hood to put a larger engine in there! Lots of good parts left. 1 Share this post Link to post Share on other sites
AMC RULES 36,945 #81 Posted July 28, 2016 Easily worth a $150 offer. Share this post Link to post Share on other sites
russellmc301 600 #82 Posted July 28, 2016 the thing if i got it it would get parted out since i have no use for any of the parts besides duals. but you never know the bug like to get fed Share this post Link to post Share on other sites
russellmc301 600 #83 Posted August 11, 2016 well everything is either primed or ready to be primed tommorow then to paint. what is the best paint stripper for the wheels, it just takes to long to wire wheel it clean. how do i get the valve core out since the saltinside has like stuck it in there? Share this post Link to post Share on other sites
Lane Huls 146 #84 Posted August 12, 2016 Just rip the stem off. You're going to want to make sure the inside of the rim is in good shape, and chances are the tires aren't good anyway. Share this post Link to post Share on other sites
russellmc301 600 #85 Posted August 12, 2016 have some dry rot but look good over all. where and what type of tires would be the replacements? Share this post Link to post Share on other sites
russellmc301 600 #86 Posted August 12, 2016 well i got the tire off and there was a tube inside. the rim looks greatnow i need to get a new tube. how does the tire look? Share this post Link to post Share on other sites
Lane Huls 146 #87 Posted August 12, 2016 Tire looks good to me! 2 Share this post Link to post Share on other sites
WHX?? 46,729 #88 Posted August 12, 2016 Tire looks good as far as I can see scrub them down real good with blech white or armor all tire cleaner and see how they look. If that don't do it some tire paint. 6-12 tubes are common on or TSC .....if you can find the heavier duty ones are better and make sure you use the little valve stem protector thingys. 2 Share this post Link to post Share on other sites
russellmc301 600 #89 Posted August 12, 2016 ok thanks this tire was easy to get off and i hope the next one is just as easy. Share this post Link to post Share on other sites
russellmc301 600 #90 Posted August 13, 2016 pew the second tire was married to the rim we ended up geting 2 pipe clamps and 2 boards on each side and sweezing it and it broke the bead. then of course we somehow go the rim jamped in there and we cut the tube out and my dad came over and help us. the calsium coride is nasty so we loaded them up on the cart and washed them off . now to clean the tires with armourall or bleach. Share this post Link to post Share on other sites
AMC RULES 36,945 #91 Posted August 14, 2016 Hands down best, old school tire cleaner known to man. Then, once they're clean... this stuff will make 'em look brand new. 3 Share this post Link to post Share on other sites
russellmc301 600 #92 Posted August 14, 2016 thanks ill look it up i used armourall and it made them look great Share this post Link to post Share on other sites
Achto 26,546 #93 Posted August 14, 2016 if your thinking about the tire paint. Check the Armourall, if it has silicone in it you will not be able to use the tire paint for a while. Or you will have to wash the tires down with a solvent to get rid of the silicone. 1 Share this post Link to post Share on other sites
russellmc301 600 #94 Posted August 15, 2016 as of now the tires look like fresh rubber and i'll keep at them with armourall and i hope it will make them look nice. for the tip Share this post Link to post Share on other sites
russellmc301 600 #95 Posted August 15, 2016 great news: i Got A belt Guard got it from horsedr2000 as many of you may know him. Share this post Link to post Share on other sites
russellmc301 600 #96 Posted September 4, 2016 tonight after all day not being able to start the engine do to forgeting to take the paper rag i put in there to keep dirt out. i got the jr. heart reburta running. i am very very happy since that has been making me wonder the whole time if it ran and today i now know. all the oil we put on the.it has been 1 year and 6 days since i first asked about how to tell if she ran and now i know witch is great. Share this post Link to post Share on other sites
russellmc301 600 #97 Posted September 24, 2016 (edited) well this is the second coat on most of the stuff and somestuff needs the other side finished, we got some clear coat today and i was wondering how do i put it on and how long to i wait before puting it on? i got rustoleum crystal clear enamel for the clear coat. can i sand it and then polish it and will get some what close the shine like @VinsRJ and his awesome shine on his rj-25 conversion? if yes how. Edited September 24, 2016 by russellmc301 Share this post Link to post Share on other sites
953 nut 51,630 #98 Posted September 25, 2016 Read over the "RJ -58 Project" thread that @Johndeereelfman has going, he has a lot of good information in there and is doing it right. 1 hour ago, russellmc301 said: can i sand it and then polish it 2 Share this post Link to post Share on other sites
Abe01 61 #99 Posted September 25, 2016 ....make sure to read it to the end to hopefully not repeat his mistake !(I was heartbroken for him lol) your both doing a fantastic job. I will add that if you color coat and clear coat aren't the same brand I would make a test piece to be sure they are compatible. 1 Share this post Link to post Share on other sites
russellmc301 600 #100 Posted September 29, 2016 how hard would these be to bend back? we started puting it back together, we have the frame mounted to trans and hubs put on. Share this post Link to post Share on other sites
