Ryan Revs 1 #1 Posted May 27, 2016 Hi all. I am new here but I have just bought a c141 for restoration. It is in reasonable condition. It is the 8 speed manual. Does anybody know how I can find out which belt goes from the pto pulley to the mower deck? Thanks Share this post Link to post Share on other sites
Bert 760 #2 Posted May 27, 2016 to We need to know what deck you have to answer your question 1 Share this post Link to post Share on other sites
Ryan Revs 1 #3 Posted May 27, 2016 Ok thanks. I will check tomorrow and post up. Is there a part number on the deck? Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,474 #4 Posted May 27, 2016 There may be a model number and serial number on an ID plate or decal depending on age. 2 blades or 3? Width of cut 36", 42" or 48"? Side or rear discharge? Garry 1 Share this post Link to post Share on other sites
Ryan Revs 1 #5 Posted May 27, 2016 Great I will check it first thing in the morning. Thank you very much Share this post Link to post Share on other sites
Ryan Revs 1 #8 Posted May 28, 2016 Hi. I can't find a serial number on the deck. It is 3 blades, rear discharge and 42" from blade tip to blade tip. 1 Share this post Link to post Share on other sites
Ryan Revs 1 #9 Posted May 28, 2016 Is this the one ? Thanks everbody for your help http://www.beltingonline.com/wheelhorse-108834-deck-belt-542mr-42-rear-discharge-1247 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,474 #10 Posted May 28, 2016 108834 is correct or Garry Share this post Link to post Share on other sites
Ryan Revs 1 #11 Posted May 28, 2016 6 hours ago, gwest_ca said: 108834 is correct or Garry Thanks mate all ordered. Is there anywhere you can get replacement headlight lense as its got a piece missing Share this post Link to post Share on other sites
DorkFish 42 #12 Posted May 29, 2016 According to all I can find on the Toro site, the belt should be a 102741. That's also the same belt that my 42" side discharge on my C-161 takes. Share this post Link to post Share on other sites
Ryan Revs 1 #13 Posted May 29, 2016 Yes thanks the 108834 replaces the 102741 I think. Well I hope so anyway lol. I have been using it to pull a little trailer around all morning and it's running great. Thanks for all your help. Is there anywhere that you can get replacement headlamp lense made. Share this post Link to post Share on other sites
stevasaurus 22,227 #14 Posted May 29, 2016 Check our Vendor section...Kelly may have them. Send him a Personnel Message (PM). Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,474 #15 Posted May 29, 2016 49 minutes ago, Ryan Revs said: Yes thanks the 108834 replaces the 102741 I think. Well I hope so anyway lol. I have been using it to pull a little trailer around all morning and it's running great. Thanks for all your help. Is there anywhere that you can get replacement headlamp lense made. The belt was changed for some applications only according to this service bulletin Garry Share this post Link to post Share on other sites
